XPG CYBERCORE II 1300W Power Supply
XPG CYBERCORE II 1300W Power Supply, 1300 W, 110 - 240 V, 50/60 Hz, 15 A, Over current, Over power, Over voltage, Overheating, Short circuit, Under voltage, 20+4 pin ATX
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
BETTER THAN ULTIMATE
In light of the new Intel ATX 3.0 & ATX 3.1 design guide specifications, the XPG CYBERCORE 80 PLUS Platinum series is getting an upgrade. With stricter voltage and current regulation guidelines changes needed to be implemented in order to safely and efficiently accommodate next-generation hardware. XPG has even upgraded the CYBERCORE cooling solution with a top-of-the-line XPG VENTO PRO 120 PWM Fan by Nidec to deliver optimum performance. As always, XPG is determined to provide gamers with products that meet the latest hardware demands.
Next-Gen Ready
XPG CYBERCORE II series power supply units are compatible with Intel ATX 3.0 & ATX 3.1 design guide specifications. All units come with a 12VHPWR connector as well. Upgrade your system to an ATX 3.0 & ATX 3.1 ready power supply and be fully prepared for the next generation of high-performance components! Whether you're a gamer, creator, or AI developer, an ATX 3.0 & ATX 3.1 PSU is the new standard for future hardware. Don’t get left behind.
Supports Next-Gen Graphics Cards
XPG CYBERCORE II is compatible with the latest high-end graphics cards, with a 12VHPWR (12+4 pin) connector out of the box with every unit.
Cybenetics ETA PLATINUM and LAMBDA A- Certified
XPG CYBERCORE II series is certified by the highest Cybenetics quality standards.
All configurations have achieved ETA PLATINUM grade while still maintaining LAMBDA A- rating for the noise even with our most compact form factor, reaching A- with 230V for the 1300W version. This is a statement of our commitment to deliver the absolute best performance for all of our PC users.XPG CYBERCORE series is certified by the highest Cybenetics quality standards.
80 PLUS PLATINUM Efficiency
XPG CYBERCORE II series' efficiency achieves 92.91% 115VAC at 50% load (temperature at 25℃), delivering exemplary performance even by 80 PLUS PLATINUM standards.
XPG VENTO PRO 120 PWM FAN by Nidec
XPG CYBERCORE II is the latest XPG and Nidec collaboration, utilizing our highest tier XPG VENTO PRO 120 PWM Fan for its high cooling efficiency, featuring Dual Bearing and patented technology to maintain an excellent balance between noise and life expectancy (60,000 hours at 60℃).
Efficient Fan Curve
XPG CYBERCORE II series' fan curve is intelligently designed to prolong fan life expectancy and minimize fan noise.
All Japanese 105℃ Capacitors
XPG CYBERCORE II PLATINUM Series utilizes all-Japanese high quality 105℃ capacitors to ensure power delivery is stable, consistent and efficient.
Digital Control Panel in a Compact Form Factor
XPG CYBERCORE II PLATINUM PSU’s power delivery efficiency is optimized via Digital Control Panel.
It controls, commands and optimizes power delivery’s efficiency and stability, ensuring the process is stable but also accurate, helping protects other components as well, all within such a compact form factor (LxWxH) 160x150x86mm, making it an extraordinary creation of a PLATINUM-grade power supply by XPG.
DC-to-DC Circuit Design
DC-to-DC Circuit design minimizes ripple noise, avoids unbalanced power load, and acts as a protective safeguard to components’ life expectancy. Ultimately, XPG CYBERCORE can achieve smooth and stable power delivery.
Interleaved PFC
XPG CYBERCORE II Interleaved PFC (Power Factor Correction) regulates and stabilizes voltage, and distributes power at its optimal efficiency, leveraging 2 chokes that alternate each other, reducing power loss during conversion.
XPG CYBERCORE II series' PFC is Active, meaning it provides more efficient power efficiency, automatically correcting AC input voltage (full range).
PEAK PERFORMANCE AND RELIABILITY
All XPG ATX 3.0 and ATX 3.1 power supplies are designed to support up to 235% power excursion, enabling the system to handle sudden power spikes, ensuring stability, and preventing crashes during intense workloads like gaming, rendering, and data processing.
XPG CYBERCORE II 1300W Power Supply. Total power: 1300 W, AC input voltage: 110 - 240 V, AC input frequency: 50/60 Hz. Motherboard power connector: 20+4 pin ATX, Motherboard power cable length: 75 cm, SATA power cable length: 150,600 mm. Purpose: PC, Power supply unit (PSU) form factor: ATX, 80 PLUS certification: 80 PLUS Platinum. Product colour: Black, Cooling type: Active, Fan diameter: 12 cm. Cables included: AC
| Gestione energetica | |
| Potenza totale | 1300 W |
| Tensione di ingresso AC | 110 - 240 V |
| Frequenza di ingresso AC | 50/60 Hz |
| Corrente d'ingresso | 15 A |
| Fattore di potenza | 0,99 |
| Funzionalità di protezione dell'alimentazione | Sovracorrente, Sovralimentazione, Sovraccarico, Surriscaldamento, Cortocircuito, Sotto carico |
| Connettività | |
| Connettore scheda madre | 20+4 pin ATX |
| Lunghezza del cavo di alimentazione della scheda madre | 75 cm |
| Numero di connettori SATA | 12 |
| Lunghezza del cavo di alimentazione SATA | 150,600 mm |
| Connettori periferiche (Molex) (4-pin) | 8 |
| Lunghezza del cavo di alimentazione della periferica (Molex) | 150,600 mm |
| Connettori PCI Express (6+2 pin) | 10 |
| Lunghezza del cavo dei connettori di alimentazione PCI Express (12+4 pin) | 650 mm |
| Lunghezza del cavo di alimentazione PCI Express | 75 cm |
| Connettore di potenza CPU (4+4-Pin) | Sì |
| Lunghezza del cavo di alimentazione CPU | 75 cm |
| Lunghezza del cavo dell'unità del disco floppy | 15 cm |
| Tipo di cablaggio | Totalmente Modulare |
| Prestazione | |
| Utilizzo | PC |
| Fattore di forma dell'unità di alimentazione (PSU) | ATX |
| Certificazione 80 PLUS | 80 PLUS Platinum |
| Versione ATX | 3.0 |
| Tecnologia dei cuscinetti | DBB |
| Tempo medio tra guasti (MTBF) | 125000 h |
| Certificazione | CE | CB| FCC(IC) | TUV | cTUVus | TUV S-Zeichen | NOM | BSMI | UKCA | EAC | CCC | RCM |
| Design | |
| Colore del prodotto | Nero |
| Tipo di raffreddamento | Attivo |
| Diametro del ventilatore | 12 cm |
| Numero di ventole | 1 ventola(e) |
| Collocazione ventole | Alto |
| Interrutore On/Off | Sì |
| Dimensioni e peso | |
| Larghezza | 160 mm |
| Profondità | 150 mm |
| Altezza | 86 mm |
| Peso | 2 kg |
| Dati su imballaggio | |
| Peso dell'imballo | 4,6 kg |
| Tipo di imballo | Scatola |
| Dettagli tecnici | |
| Certificati di conformità | BSMI, CB, CE, Federal Communications Commission (FCC), cTUVus, UKCA |
| Conformità alla sostenibilità | Sì |
- Purpose
- PC
- Total power
- 1300 W
- AC input voltage
- 110 - 240 V
- Motherboard power connector
- 20+4 pin ATX
- Peripheral (Molex) power connectors (4-pin)
- 8
- Power supply unit (PSU) form factor
- ATX
- 80 PLUS certification
- 80 PLUS Platinum
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
