Tenda TEF1118P-16-150W network switch Unmanaged L2 Fast Ethernet (10/100) Power over Ethernet (PoE) 1U Black
Tenda TEF1118P-16-150W, Unmanaged, L2, Fast Ethernet (10/100), Power over Ethernet (PoE), Rack mounting, Wall mountable
Dedicated for Surveillance & SMB Networking
GE & SFP uplink ports,Large Buffer of Nearly 3M
With one 10/100/1000 Mbps combo SFP slot, the switch can meet the current demand for uplink bandwidth of Gigabit WLAN and HD digital surveillance. Working with Tenda optical fibermodule TEG311SM, the switch supports a maximum transmission distance up to 20km.
6KV Excellent Lightning Protection
The switch offers various safety and protection types, including 6 kV lightning protection, PSE short-circuit protection, PoE overload protection, surge current protection etc, and these greatly protect the switch from being damaged by thunderstorm. Besides, it supports wide voltage input, AC:100-240V~50/60Hz..
Cascading with 6 Devices
Can Support IP Surveillance Project of up to 96 Cameras
In the number of about 100 terminals accessed to the network, cascading 6 devices through the G1、G2/SFP2can achieve up to 96-channel monitoring, according to the project , it supports 300W/500W IP Caccessed and ensure stable video transmission without breaking up.If the both ends of devices are connected to the NVR, the video can be watched locally.
4 Modes for Different Networks
Standard mode, Port-based Priority mode, Port-based VLAN mode and Extend mode make TEF1118P-16-150W be able to deal with different networks,special for small & Medium-sized IP surveillance & WI-FI coverage project.
Mode 1: Standard Mode
This is the default working mode of TEF1118P-16-150W. In the mode, all ports can communicate with each other independently.
Mode 2: Port-based Priority Mode
In this mode, ports 1 to 8 have higher priority than other ports, and all ports can communicate with each other. When the switch is connected to multiple IP cameras, you are recommended to use this mode for better smooth transmission with the key IP cameras connected to higher priority ports, and connect the 2 uplink ports (Ports G1 & G2/SFP2) to uplink devices (such as NVR or Router).
Mode 3:Port-Based VLAN Mode
In this mode, ports 1 to 16 can communicate with uplink ports (Ports G1 & G2/SFP2), but can not communicate with each other. You can use this mode to isolate broadcaststorm and prevent ARP virus and DHCP sproofing.
Mode 4: Extend Mode
Due to the complex monitoring environment, the distance from each terminal to the monitoring center is different, some even more than hundred meters. TEF1118P-16-150W can support 250 meters data transmission in the Extend mode, which can save the cost of your project with less devices used.
Tenda TEF1118P-16-150W. Switch type: Unmanaged, Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Fast Ethernet (10/100), Basic switching RJ-45 Ethernet ports quantity: 18. Full duplex. MAC address table: 4096 entries, Switching capacity: 7.2 Gbit/s. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z. Power over Ethernet (PoE). Wall mountable, Rack mounting, Form factor: 1U
Caratteristiche di gestione | |
Tipo interruttore | Non gestito |
Livello del commutatore | L2 |
Connettività | |
Quantità di porte RJ-45 | 18 |
Tipo di porte RJ-45 | Fast Ethernet (10/100) |
Quantità di porte Fast Ethernet (rame) | 16 |
Quantità di porte Gigabit Ethernet (rame) | 2 |
Quantità di porte Combo SFP | 1 |
Collegamento in rete | |
Standard di rete | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Supporto 10G | No |
Tecnologia Ethernet su cavi in rame | 10BASE-T, 100BASE-TX, 1000BASE-T |
Tipi di cavi supportati | Cat5, Cat5e |
Half-Duplex | Sì |
Auto-apprendimento dell'indirizzo MAC supportato | Sì |
VLAN support | Sì |
Caratteristiche della LAN virtuale | Port-based VLAN |
Trasmissione dati | |
Dimensioni tavola MAC | 4096 voci |
Capacità di commutazione | 7,2 Gbit/s |
tasso di inoltro | 5,36 Mpps |
Store-and-forward | Sì |
Supporto Jumbo Frames | No |
Design | |
Montaggio rack | Sì |
Fattore di forma | 1U |
Colore del prodotto | Nero |
Indicatori LED | Collegamento, PoE, Potenza |
Montabile a parete | Sì |
Certificazione | FCC, CCC |
Prestazione | |
Fanless | Sì |
Gestione energetica | |
Alimentazione | AC |
Fonte di alimentazione inclusa | Sì |
Tensione di ingresso AC | 100 - 240 V |
Frequenza di ingresso AC | 50 - 60 Hz |
Funzionalità di protezione dell'alimentazione | Sovraccarico, Cortocircuito |
Power over Ethernet (PoE) | |
Supporto Power over Ethernet (PoE) | Sì |
Quantità di porte Power over Ethernet plus (PoE+) | 16 |
Potenza Power over Ethernet (PoE) per porta | 30 W |
Bilancio energetico totale del PoE | 130 W |
Condizioni ambientali | |
Intervallo temperatura di funzionamento | 0 - 45 °C |
Intervallo di temperatura | -40 - 70 °C |
Range di umidità di funzionamento | 10 - 90% |
Umidità | 5 - 90% |
Dimensioni e peso | |
Larghezza | 294 mm |
Profondità | 178,8 mm |
Altezza | 44 mm |
Sostenibilità | |
Certificati di sostenibilità | CE, RoHS |
Conformità alla sostenibilità | Sì |
Dati logistici | |
Codice del Sistema Armonizzato (SA) | 85176990 |
- Power over Ethernet (PoE)
- Y
- Power supply
- AC
- Power supply included
- Y
- Switch type
- Unmanaged
- Basic switching RJ-45 Ethernet ports quantity
- 18
- Basic switching RJ-45 Ethernet ports type
- Fast Ethernet (10/100)
- Switching capacity
- 7.2 Gbit/s
- 10G support
- N
- Rack mounting
- Y
- MAC address table
- 4096 entries
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.