D-Link DIS‑100G‑5SW Unmanaged L2 Gigabit Ethernet (10/100/1000) Black
D-Link DIS‑100G‑5SW, Unmanaged, L2, Gigabit Ethernet (10/100/1000), Full duplex, Wall mountable
Durable, Reliable, and Efficient
The DIS-100G Series switches are housed in a highly resistant IP30-rated metal casing to protect the switches from harsh environmental conditions. The high electromagnetic compatibility (EMC) protects the DIS-100G Series from unwanted effects when operating in environments with strong electromagnetic interference. The fanless design extends the life of the DIS-100G Series while also being able to operate in a wide temperature range from -40 °C up to 75 °C. For increased flexibility, the DIS-100G Series can also be mounted on a DIN rail or conveniently mounted on a solid surface wall. In addition, the DIS-100G Series supports dual power input which allows for a redundant power supply configuration to make sure the switches continue to operate in the event of a primary power supply failure.
Meanwhile, a powerful IEEE 802.1p Quality of Service (QoS) engine prioritizes network traffic so that time-sensitive data is delivered efficiently, even during bursts of high data traffic. This helps ensure an optimal experience for streaming critical data such as from surveillance and recognition systems.
Power over Ethernet Support
The PoE-ready DIS-100G-5PSW features a total PoE budget of 120 W, capable of supplying up to 30 W of power per port to connected PoE-enabled devices leveraging existing conventional Ethernet cabling. This effectively cuts down deployment times, reduces cable clutter, and eliminates the need for dedicated power supplies to allow PoE-devices to be installed in remote locations.
Green Ethernet Technology
The DIS-100G Series features green technology, including IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. Energy Efficient Ethernet reduces the power consumption of the switches when network utilization is low, effectively lowering the cost of ownership during
periods of inactivity. Link status detection automatically powers down ports when there is no link detected, saving power when the connected device has been shut down or disconnected. Cable length detection automatically adjusts the power output of the port based on the length of the cable, reducing the power requirements of the switch to only what is necessary for the installation.
Limited Lifetime Warranty
D-Link offers a Limited Lifetime Warranty on the DIS-100G Series Gigabit Industrial Unmanaged Switches to further its commitment to product quality and long-term customer confidence.
D-Link DIS‑100G‑5SW. Switch type: Unmanaged, Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 4. Full duplex. MAC address table: 2000 entries, Switching capacity: 10 Gbit/s. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z. DC input voltage: 12 - 58 V. Wall mountable
Caratteristiche di gestione | |
Tipo interruttore | Non gestito |
Livello del commutatore | L2 |
Modellizzazione del traffico | Sì |
Connettività | |
Quantità di porte RJ-45 | 4 |
Tipo di porte RJ-45 | Gigabit Ethernet (10/100/1000) |
Quantità di slot per modulo SFP | 1 |
Connettore a fibra ottica | LC |
Collegamento in rete | |
Standard di rete | IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Supporto 10G | No |
Full duplex | Sì |
Auto-negoziazione | Sì |
Trasmissione dati | |
Dimensioni tavola MAC | 2000 voci |
Capacità di commutazione | 10 Gbit/s |
tasso di inoltro | 7,44 Mpps |
Store-and-forward | Sì |
Supporto Jumbo Frames | Sì |
Frame Jumbo | 9000 |
Funzioni Multicast | |
Supporto multicast | Sì |
Design | |
Colore del prodotto | Nero |
Indicatori LED | LAN, Potenza |
Montaggio su rail DIN | Sì |
Compatibilità elettromagnetica | FCC 15, EN 61000-6-2, EN 61000-6-4, EN 61000-4-2, -3, -4, -5, -6 (3) |
Certificazione | IEC60068-2-6; IEC60068-2-27; IEC60068-2-32; UL 60950-1, CE, FCC, RoHS, WEEE |
Gestione energetica | |
Voltaggio input DC | 12 - 58 V |
Consumi | 2,74 W |
Consumo energetico (max) | 3,57 W |
Funzionalità di protezione dell'alimentazione | Sovracorrente, Polarità inversa |
Power over Ethernet (PoE) | |
Supporto Power over Ethernet (PoE) | No |
Condizioni ambientali | |
Intervallo temperatura di funzionamento | -40 - 75 °C |
Intervallo di temperatura | -40 - 85 °C |
Range di umidità di funzionamento | 5 - 95% |
Umidità | 0 - 95% |
Dissipazione del calore | 12,18 BTU/h |
Dimensioni e peso | |
Larghezza | 112,2 mm |
Profondità | 29,1 mm |
Altezza | 89,4 mm |
Peso | 295 g |
Dati logistici | |
Codice del Sistema Armonizzato (SA) | 85176990 |
- Power over Ethernet (PoE)
- N
- Switch type
- Unmanaged
- Basic switching RJ-45 Ethernet ports quantity
- 4
- Basic switching RJ-45 Ethernet ports type
- Gigabit Ethernet (10/100/1000)
- Switching capacity
- 10 Gbit/s
- 10G support
- N
- MAC address table
- 2000 entries
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.