Edimax GS-1008P V2 network switch Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black
Edimax GS-1008P V2, Gigabit Ethernet (10/100/1000), Full duplex, Power over Ethernet (PoE)
Power over Ethernet (PoE+) Auto Detection
Features eight IEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30 watts of electricity per port. It can convert standard 100‐240V AC power into low‐voltage 50 - 57V DC electricity to power IEEE 802.3at compliant network accessories via existing LAN cables. With PoE detection capability, the GS-1008P V2 is able to verify whether the connected device is IEEE 802.3at compliant. In the event that a PoE device is not detected, only network data will be transmitted through the LAN cable – meaning easy setup and management of network devices such as access points and network cameras.
CCTV Mode
The unique CCTV-mode DIP switch function is ideal for surveillance networking environment. Switching all DIP switches to on enables CCTV mode which gives multi-function PoE + data extension, Port Isolation and QoS on the GS-1008P V2. When using video surveillance systems for homes, business or institutions, the CCTV mode provides better speeds for multicast viewing and easier installation. Setting all DIP switches back to off quickly changes the GS-1008P V2 back to normal for general-use data transmission.
Power and Data Distance Extension
The built-in DIP switch provides extended operation modes on switch 1, 2, 5, 6 & 7. The GS-1008P V2 operates as a “standard” IEEE 802.at/af PoE Switch when DIP switches are off. With switches on, the GS-1008P V2 operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 200 meters, overcoming the 100m limit on Ethernet UTP cables. With this brand-new feature, the GS-1008P V2 provides an additional solution for 802.3at/af PoE distance extension and saves costs of Ethernet cable installation.
Innovative Port-based VLAN Features
The GS-1008P V2 features port-based VLAN where ports can be isolated from each other via DIP switch port 3 & 8. This can help to prevent IP camera’s multicast or broadcast storms from affecting each other.
Hardware QoS for Video & Voice Traffic Priority
Supports 802.1p QoS via DIP switch port 4. This ensures first priority for video and voice traffic.
Plug & Play, No Installation Required
Just plug Ethernet or PoE enabled devices into the switch. Data and power can be transmitted through existing standard Cat-5e Ethernet cables with no additional cables or configuration required. The GS-1008P V2 reduces the difficulty, time and cost of network setup.
Flexible Network Deployment & Energy Efficient
A fast and effective solution when power outlets are unavailable for your network devices. The switch additionally supports IEEE 802.3az Energy Efficient Ethernet which allows for less power consumption and reduced costs during periods of low data activity.
Fan-less Quiet & Compact Design
A fan-less design ensures quiet operation and enables an even more compact design, keeping valuable desk space free in home or small office environments.
Edimax GS-1008P V2. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 8. Full duplex. MAC address table: 8000 entries, Switching capacity: 16 Gbit/s. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x. Power connector: AC-in jack. Power over Ethernet (PoE)
Caratteristiche di gestione | |
Supporto qualità del servizio (QoS) | Sì |
Connettività | |
Quantità di porte RJ-45 | 8 |
Tipo di porte RJ-45 | Gigabit Ethernet (10/100/1000) |
Connettore di alimentazione | Jack di ingresso AC |
Collegamento in rete | |
Standard di rete | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
Supporto 10G | No |
Tecnologia Ethernet su cavi in rame | 10BASE-T, 100BASE-TX, 1000BASE-T |
Full duplex | Sì |
Supporto controllo flusso | Sì |
VLAN support | Sì |
Caratteristiche della LAN virtuale | Port-based VLAN |
Trasmissione dati | |
Dimensioni tavola MAC | 8000 voci |
Capacità di commutazione | 16 Gbit/s |
Store-and-forward | Sì |
Supporto Jumbo Frames | Sì |
Frame Jumbo | 9000 |
Velocità di trasmissione a pacchetto (10 Mbps) | 14880 pps |
Sicurezza | |
Protezione contro i loop back | Sì |
Funzioni Multicast | |
Supporto multicast | Sì |
Design | |
Colore del prodotto | Nero |
Indicatori LED | Collegamento, PoE, Potenza |
Certificazione | FCC, CE, LVD |
Prestazione | |
Plug & Play | Sì |
Gestione energetica | |
Tensione di ingresso AC | 100 - 240 V |
Frequenza di ingresso AC | 50 - 60 Hz |
Potenza in uscita | 160 W |
Consumi | 5 W |
Power over Ethernet (PoE) | |
Supporto Power over Ethernet (PoE) | Sì |
Quantità di porte Power over Ethernet plus (PoE+) | 8 |
Potenza Power over Ethernet (PoE) per porta | 30 W |
Bilancio energetico totale del PoE | 130 W |
Condizioni ambientali | |
Intervallo temperatura di funzionamento | 0 - 40 °C |
Intervallo di temperatura | -40 - 70 °C |
Range di umidità di funzionamento | 10 - 90% |
Umidità | 5 - 90% |
Dimensioni e peso | |
Larghezza | 133 mm |
Profondità | 215,5 mm |
Altezza | 42 mm |
Peso | 1,61 kg |
Dati logistici | |
Codice del Sistema Armonizzato (SA) | 85176990 |
- Power over Ethernet (PoE)
- Y
- Basic switching RJ-45 Ethernet ports quantity
- 8
- Basic switching RJ-45 Ethernet ports type
- Gigabit Ethernet (10/100/1000)
- Switching capacity
- 16 Gbit/s
- 10G support
- N
- MAC address table
- 8000 entries
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.