ASUS ESC4000A-E12 Socket SP5 Rack (2U) Silver
ASUS ESC4000A-E12, Socket SP5, 1150 MB, AMD EPYC 9004, DDR5-SDRAM, 256GB, 16GB, 32GB, 64GB, 128GB, 3 TB
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
Four dual-slot GPU compute in 2U
ESC4000A-E12 is an AMD EPYC™ 9004 single-socket server built for the demands of enterprise AI infrastructure to deliver unprecedented performance with industry-leading GPUs, faster GPU interconnect and higher-bandwidth fabric, and supports up to four dual-slot active or passive GPUs scalable configuration with a choice of NVIDIA NVLink® Bridge or AMD Infinity Fabric™ Link to enable scaling of performance with increased bandwidth — ready to match your AI and HPC workloads.
PCIe 5.0 Ready
Faster storage, graphics and networking capabilities
PCI Express® (PCIe®) 5.0 delivers 32 GT/s bandwidth, which is twice the speed of PCIe 4.0, and offers lower power consumption, better lane scalability and backwards compatibility. ASUS servers are PCIe 5.0 ready, with scalable designs to satisfy the increasing workloads or modern data centers.
Sustainability
Keep your data center green
Data centers can consume huge amounts of electricity, raising environmental concerns. ASUS servers are designed to optimize both total cost of ownership (TCO) and total cost to the environment (TCE), including thermal design, power efficiency and advanced cooling solutions — reducing the impact of our products on the planet.
Comprehensive liquid-cooling solutions
Better data-center power efficiency
As liquid cooling is maturing in the age of supercomputing, ESC4000A-E12 is purpose-built for sustainability. ESC4000A-E12 supports liquid-cooled NVIDIA® A100 PCIe GPU that delivers powerful performance with less energy and provides direct-to-chip (D2C) cooling or immersion-cooling solutions for maximum data-center energy efficiency.
Optimized Thermal Design
Independent CPU and GPU airflow tunnels
Our servers features a streamlined design with dedicated CPU and GPU airflow tunnels for seriously efficient heat dissipation. This advanced design provides better cooling for both the GPU and CPU, enabling heat to be expelled into the surrounding ambient air for greater energy efficiency and overall savings on system power.
Titanium power supplies
Up to 96% efficient for operating cost reduction
ESC4000A-E12 supports 2600 W 80 PLUS® Titanium redundant power supplies to ensure power is supplied to the system equally from all power sources, maximizing efficiency and enabling uninterrupted operation.
Management
Comprehensive IT infrastructure solutions
Advanced ASUS management tools comprise IT assets management, security and reliability to improve the performance, up-time and real-time monitoring of the servers remotely — highly increasing the efficiency of IT infrastructure.
BMC
Remote server management
ASUS ASMB11-iKVM is the latest server-management solution from ASUS, built upon the ASPEED 2600 chipset running on the latest AMI MegaRAC SP-X. The module provides various interfaces to enable out-of-band server management through WebGUI, Intelligent Platform Management Interface (IPMI) and Redfish® API.
IT infrastructure-management software
Streamline IT operations via a single dashboard
ASUS Control Center (ACC) is remote IT-management software application designed for monitoring hardware and software IT assets and inventory status, and enabling seamless remote BIOS configurations and updates, efficient IT diagnostics and troubleshooting and enhanced security with hotfix updates — allowing easier server management for any IT infrastructure.
Hardware Root-of-Trust Solution
Detect, recover, boot and protect
ASUS servers integrate PFR FPGA as the platform Root-of-Trust solution for firmware resiliency to prevent from hackers from gaining access to infrastructure. ASUS security solutions are fully compliant with the 2018 National Institute of Standards and Technology (NIST) SP 800 193 specification.
* Platform Firmware Resilience (PFR) module must be specified at time of purchase and is factory-fitted. It is not for sale separately.
Trusted Platform Module 2.0
ASUS servers also include support Trusted Platform Module 2.0 (TPM 2.0) to secure hardware through integrated cryptographic keys and offer regular firmware update for vulnerabilities.
Omniverse
NVIDIA® solutions for 3D collaboration
Serviceability
Improved IT operational efficiency
Tool-less Cover
ASUS servers feature three easy-access covers that can be opened without tools, enabling IT staff to perform maintenance on specific components without removing the server fully from the rack.
Front-bezel Q-Code
ASUS servers have a visible Q-Code/port-80 LED display LED for simple monitoring of the entire boot process, from power on through loading of the operating system.
Hot-swap design
ASUS servers feature multiple hot-swap components, including fans, power supplies and storage for easy troubleshooting to keep 24/7 seamless operations.
Performance
AMD EPYC™ 9004 Series Processors
The 9004 Series EPYC CPUs amplifies the AMD history of x86 architecture innovations and record-breaking performance with next generation 5nm technology as well as introducing support for high performant DDR5 DIMMs and fast PCIe® Gen 5 I/O. EPYC 9004 CPUs support 12 memory channels with 2 DIMMs/channel capability, delivering the resources needed for memory hungry AI, ML, HPC, and large in-memory computations.
ASUS ESC4000A-E12. Processor socket: Socket SP5, Maximum cache: 1150 MB, Compatible processor series: AMD EPYC 9004. Supported memory types: DDR5-SDRAM, Supported DIMM module capacities: 256GB, 16GB, 32GB, 64GB, 128GB, Maximum internal memory: 3 TB. Storage drive sizes supported: 2.5,3.5", Supported storage drive types: HDD & SSD, Supported storage drive interfaces: Serial ATA, Serial Attached SCSI (SAS). Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s, LAN controller: Intel® I350. Chassis type: Rack (2U), Product colour: Silver
| Processore | |
| Processore integrato | No |
| Presa per processore | Socket SP5 |
| Modello del processore | 9004 |
| Numero di processori supportati | 1 |
| Cache massima | 1150 MB |
| Processori compatibili | AMD EPYC 9004 |
| Memoria | |
| Numero di slot DIMM | 12 |
| Tipi di memoria supportati | DDR5-SDRAM |
| Capacità del modulo DIMM supportate | 256GB, 16GB, 32GB, 64GB, 128GB |
| RAM massima supportata | 3 TB |
| velocità orologio RDIMM supportata | 4400,4800 MHz |
| Archiviazione | |
| numero di dispositivi di archivio supportati | 12 |
| Hot-swap hard drive bays | Sì |
| Numero di attacchi da 2.5" | 4 |
| Numero di vani per drive 3.5" | 8 |
| Dimensioni dei dispositivi di archivio supportati | 2.5,3.5" |
| Tipi di unità di archiviazione supportate | HDD & SSD |
| Interfacce dell'unità di archiviazione supportate | SATA, Serial Attached SCSI (SAS) |
| Collegamento in rete | |
| Tipo di interfaccia Ethernet | Gigabit Ethernet |
| Velocità trasferimento Ethernet LAN | 10,100,1000 Mbit/s |
| Controller LAN | Intel® I350 |
| Connettività | |
| Quantità di porte USB 3.2 Gen 1 (3.1 Gen 1) di tipo A | 6 |
| Quantità porte Ethernet LAN (RJ-45) | 2 |
| Porta IPMI LAN (RJ-45) | Sì |
| Quantità porte VGA (D-Sub) | 1 |
| Slot espansione | |
| PCI Express x8 slots | 2 |
| PCI Express x16 slots | 14 |
| Caratteristiche | |
| BMC integrato con IPMI | Sì |
| Modulo della piattaforma fidata (TPM) | Sì |
| versione Trusted Platform Module (TPM) | 2.0 |
| Caratteristiche speciali del processore | |
| Supporto di Interfaccia di Gestione di Piattaforma Intelligente (IPMI) | Sì |
| Design | |
| Tipo di case | Armadio (2U) |
| Colore del prodotto | Argento |
| Gestione energetica | |
| Alimentazione | 2600 W |
| Numero di alimentatori principali | 2 |
| Certificazione 80 PLUS | 80 PLUS Titanium |
| Condizioni ambientali | |
| Umidità | 20 - 90% |
| Dimensioni e peso | |
| Peso | 24 kg |
| Dati su imballaggio | |
| Peso dell'imballo | 34,8 kg |
- Number of storage drives supported
- 12
- Ethernet LAN (RJ-45) ports
- 2
- Processor socket
- Socket SP5
- Chassis type
- Rack (2U)
- Power supply
- 2600 W
- Number of processors supported
- 1
- Supported memory types
- DDR5-SDRAM
- Number of DIMM slots
- 12
- Built-in processor
- N
- Hot-swap HDD bays
- Y
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
