Silverstone RM22-312 HDD SSD enclosure Stainless steel 2.5 3.5"
zoom_out_map
chevron_left chevron_right
PLUS

Silverstone RM22-312 HDD/SSD enclosure Stainless steel 2.5/3.5"

Silverstone RM22-312, HDD/SSD enclosure, 2.5/3.5", SAS, SAS-2, SAS-3, Serial ATA, Serial ATA II, Serial ATA III, 12 Gbit/s, Hot-swap, Stainless steel

€496.99 Tax included

€407.37 Tax excluded

Shipping Rules
Orders placed after 12 noon will be processed the following day (Saturday and Sunday excluded)
check Delivery within 6 working days
Paga in comode rate senza costi né interessi
/mese

Close
VALIDO CON TRIPPODO PLUS

● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.

● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
 
Distinctive exterior
Distinctive front panel features 12 x hot-swappable 3.5" bays or 12 x hot-swappable 2.5" bays with handle bars allowing for easy accessibility to the internal components

Storage device performance
HDD backplane supports 12 ports SAS / SATA drives and 12Gb/s Mini-SAS HD SFF-8643 x 3 with SGPIO

Cooling capabilities
Utilizing the typical front-to-back directional airflow, RM22-312 comes pre-installed with three 80mm x 38mm hot-swappable PWM fans, designed to achieve a rapid heat dissipation effect that does not easily accumulate hot air inside

Sliding rail compatibility
Reserved mounting holes for sliding rails which can be easily installed. Can be used with RMS03-26 rail

Silverstone RM22-312. Product type: HDD/SSD enclosure. Number of storage drives supported: 12, Storage drive size: 2.5/3.5", Supported storage drive interfaces: SAS, SAS-2, SAS-3, Serial ATA, Serial ATA II, Serial ATA III. Data transfer rate: 12 Gbit/s. Hot-swap. Rack mounting, Rack capacity: 2U, Product colour: Stainless steel. USB connector type: USB Type-A
Archiviazione
Dimensione del dispositivo di archiviazione2.5/3.5"
Interfacce dell'unità di archiviazione supportateSAS, SAS-2, SAS-3, SATA, Seriale ATA II, Serial ATA III
numero di dispositivi di archivio supportati12
Hot-swap
Connettività
Collegamento del dispositivo USB
Versione USB3.2 Gen 1 (3.1 Gen 1)
Connettore USBUSB tipo A
Numero di USB2
Design
Tipo di prodottoBox esterno HDD/SSD
Colore del prodottoStainless steel
MaterialiMetallo
Indicatori LEDHDD, LAN, Potenza
Interrutore On/Off
Montaggio rack
Capacità di rack2U
Numero di ventole3 ventola(e)
Diametro del ventilatore8 cm
Prestazione
Velocità di trasferimento dati12 Gbit/s
Dimensioni e peso
Larghezza430 mm
Profondità660 mm
Altezza88,5 mm
Peso10,9 kg
Contenuto dell'imballo
Manuale dell'utente
Dati logistici
Codice del Sistema Armonizzato (SA)84733080
SST-RM22-312
2 Items
4710679811178
Product colour
Stainless steel
Number of storage drives supported
12
Storage drive size
2.5/3.5"
Product type
HDD/SSD enclosure
USB connectivity
Y

SHIPMENTS

All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).

The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.

The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.

Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.

RIGHT OF WITHDRAWAL

To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.

Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:

APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome

or at the email address info@trippodo.com or by fax at +39 06 99367459.

It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.

It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.

The refund will be made within 14 calendar days from the arrival of the object at our office.

NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.