APC SRTL1500RMXLI-NC uninterruptible power supply (UPS) Double-conversion (Online) 1.5 kVA 1350 W 8 AC outlet(s)
APC SRTL1500RMXLI-NC, Double-conversion (Online), 1.5 kVA, 1350 W, Sine, 220 V, 240 V
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Scalable runtime
Allows additional run time to be quickly added as needed.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Manageability
Serial connectivity
Provides management of the UPS via a serial port.
LED status indicators
Quickly understand unit and power status with visual indicators.
Network manageable
Provides remote power management of the UPS over the network.
SmartSlot
Customize UPS capabilities with management cards.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Adaptability
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Serviceability
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Protection
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Cold-start capable
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Marketing Features
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Save time with easy and convenient remote accessibility.
Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
APC SRTL1500RMXLI-NC. UPS topology: Double-conversion (Online), Output power capacity: 1.5 kVA, Output power: 1350 W. AC outlet types: C13 coupler, Power plug: C14 coupler, AC outlets quantity: 8 AC outlet(s). Battery technology: Lithium-Ion (Li-Ion), Battery life (max): 10 year(s), Battery recharge time: 6 h. Form factor: Rackmount, Product colour: Black, Grey, Rack capacity: 3U. Width: 432 mm, Depth: 590 mm, Height: 128 mm
Caratteristiche | |
Topologia UPS | Doppia conversione (online) |
Potenza in uscita | 1,5 kVA |
Potenza in uscita | 1350 W |
Forma d'onda | Sinusoidale |
Tensione operativa in entrata (min) | 220 V |
Tensione operativa in entrata (max) | 240 V |
Frequenza di ingresso | 40/70 Hz |
Tensione operativa di uscita (min) | 220 V |
Tensione di uscita (max) | 240 V |
frequenza output | 50/60 Hz |
Valutazione sovraccarico energetico | 340 J |
Fattore di cresta | 3:1 |
Spegnimento di emergenza (EPO) | Sì |
Emissione acustica | 50 dB |
Protezione contro le sovratensioni | Sì |
Allarmi sonori | Sì |
Riavvio automatico | Sì |
Connettività | |
Tipo di uscita AC | Accoppiatore C13 |
Presa di corrente | Accoppiatore C14 |
Quantità prese AC | 8 presa(e) AC |
Porta USB | Sì |
Interfaccia seriale | Sì |
Tipo interfaccia seriale | RJ-45 |
Porte seriali | 1 |
Quantità porte Ethernet LAN (RJ-45) | 1 |
Tecnologia di cablaggio | 10/100Base-T |
SmartSlot | Sì |
Batteria | |
Tecnologia batteria | Ioni di Litio |
Durata della batteria (max) | 10 anno/i |
Tempo di ricarica | 6 h |
Batteria scambio a caldo | Sì |
test automatico batteria | Sì |
Partenza a freddo | Sì |
Design | |
Fattore di forma | Montaggio a rack |
Colore del prodotto | Nero, Grigio |
Capacità di rack | 3U |
Tipo di display | LCD |
Indicatori LED | status |
Codice di protezione internazionale (IP) | IP20 |
Certificazione | CE, EAC, RCM, VDE |
Condizioni ambientali | |
Intervallo temperatura di funzionamento | 0 - 40 °C |
Intervallo di temperatura | -20 - 50 °C |
Range di umidità di funzionamento | 0 - 95% |
Umidità | 0 - 95% |
Altitudine di funzionamento | 0 - 3000 m |
Altitudine di non-funzionamento | 0 - 15000 m |
Dimensioni e peso | |
Larghezza | 432 mm |
Profondità | 590 mm |
Altezza | 128 mm |
Peso | 25,7 kg |
Larghezza imballo | 600 mm |
Profondità imballo | 850 mm |
Altezza imballo | 445 mm |
Peso dell'imballo | 37,4 kg |
Dati logistici | |
Quantità per pallett | 6 pz |
Codice del Sistema Armonizzato (SA) | 85078000 |
Altre caratteristiche | |
Voltaggio di uscita | 230 V |
- Product colour
- Black, Grey
- Form factor
- Rackmount
- Output power capacity
- 1.5 kVA
- Waveform
- Sine
- Input operation voltage (min)
- 220 V
- Input operation voltage (max)
- 240 V
- Input frequency
- 40/70 Hz
- UPS topology
- Double-conversion (Online)
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.