Gigabyte UD850GM PG5W power supply unit 750 W 20+4 pin ATX ATX Black
Gigabyte UD850GM PG5W, 750 W, 100 - 240 V, 12 A, Active, 105 W, 732 W
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
The UD750GM PCIE 5.0 can sustain up to 3x GPU power excursion. It has a 16-pin connector and comes with a high-quality native 16-pin cable that allows you to use the PSU with a PCIe Gen 5.0 graphics card. This cable can support up to 450 watts of power to the graphics card.
Support Intel ATX 3.0 standard
The UD750GM PCIE 5.0 can sustain up to 2x total power excursion. It is fully compatible with Intel PSDG (Power Supply Design Guide) ATX 3.0 standard which supports up to 200% power excursion, reaches 70% low load efficiency and complies with required power supply timing standards.
ULTRA
DURABLE
Inherit the product design spirit of GIGABYTE Ultra Durable, thus introducing a variety of high-quality materials and designs. Ultra Durable combines high-quality main Japanese capacitors, enhanced thermal solution, 120mm smart hydraulic bearing (HYB) fan, and six circuit protection designs. It provides consumers with a high-quality and stable power supply, and can be used for a long time.
HIGH QUALITY
JAPANESE CAPACITORS
The main capacitors use high quality Japanese capacitors to produce the efficient performance and ensure the longer reliability.
ENHANCED THERMAL
SOLUTION
Compared with the standard thermal solution, we have enlarged the heatsink by about 200% or more, and optimized the airflow. The heat dissipation performance is increased by more than 10%, thus prolonging the service life of the components.
120MM SMART HYDRAULIC
BEARING (HYB) FAN
The fan speed is adjusted according to the automatic power detection and stops when the system is idle or under low load (less than 20% load). The hydraulic bearing fan provides longer and more stable life time.
PROTECTION
In order to make sure the entire computer system to operate stably under any conditions, we not only added protection designs such as OCP, OTP, OVP, OPP, UVP and SCP, but also ensured the stable operation of your system through the safety certification of various countries.
FULLY MODULAR DESIGN
All the black flat cables are modular design. Installing only the cables you need to reduce clutter, to increase the airflow and to improve the chassis thermal performance.
80 PLUS GOLD CERTIFIED
80 Plus Gold certified ensures to deliver 90% efficiency at 50% load. The better power efficiency leads to less power waste, less heat and less fan noise.
PLENTIFUL POWER SUPPLY
The +12V can provide a total of 750W power output. The 16-pin cable (+12VHPWR) can provide up to 450 watts of power to the latest PCIe Gen 5.0 graphics card.
COMPACT DESIGN
With the help of engineers' excellent design capabilities and heat dissipation technology on various hardware products, and the use of higher quality materials, GIGABYTE has reduced the length of the power supply to an amazing 140 mm, so it can be easily installed in any chassis without space constraints.
Gigabyte UD850GM PG5W. Total power: 750 W, AC input voltage: 100 - 240 V, Input current: 12 A. Motherboard power connector: 20+4 pin ATX, Motherboard power cable length: 61 cm, SATA power cable length: 150,300,450,600 mm. Purpose: PC, Power supply unit (PSU) form factor: ATX, 80 PLUS certification: 80 PLUS Gold. Product colour: Black, Cooling type: Active, Fan diameter: 12 cm. Cables included: CPU, PCIe, Peripheral (Molex), SATA
| Gestione energetica | |
| Potenza totale | 750 W |
| Tensione di ingresso AC | 100 - 240 V |
| Corrente d'ingresso | 12 A |
| Tipo di correttore del fattore di potenza (PFC) | Attivo |
| Potenza combinata (+3.3V) | 105 W |
| Potenza combinata (+12V) | 732 W |
| Potenza combinata (+5V) | 105 W |
| Potenza combinata (-12V) | 3,6 W |
| Potenza combinata (+5Vsb) | 15 W |
| Corrente massima di uscita (+3.3V) | 20 A |
| Corrente massima di uscita (+12V) | 61 A |
| Corrente massima di uscita (+5V) | 20 A |
| Corrente massima di uscita (-12V) | 2,3 A |
| Corrente massima di uscita (+5Vsb) | 3 A |
| Efficienza | 90% |
| Funzionalità di protezione dell'alimentazione | Sovracorrente, Sovralimentazione, Sovraccarico, Surriscaldamento, Cortocircuito, Sotto carico |
| Connettività | |
| Connettore scheda madre | 20+4 pin ATX |
| Lunghezza del cavo di alimentazione della scheda madre | 61 cm |
| Numero di connettori SATA | 8 |
| Lunghezza del cavo di alimentazione SATA | 150,300,450,600 mm |
| Connettori periferiche (Molex) (4-pin) | 3 |
| Lunghezza del cavo di alimentazione della periferica (Molex) | 120,500 mm |
| Connettore di alimentazione EPS (4+4 poli) | Sì |
| Connettori PCI Express (6+2 pin) | 4 |
| Lunghezza del cavo di alimentazione PCI Express | 60 cm |
| Connettore di potenza CPU (4+4-Pin) | Sì |
| Lunghezza del cavo di alimentazione CPU | 60 cm |
| Connettore ATX (20+4-PIN) | Sì |
| Lunghezza del cavo dell'unità del disco floppy | 15 cm |
| Tipo di cablaggio | Totalmente Modulare |
| Prestazione | |
| Utilizzo | PC |
| Fattore di forma dell'unità di alimentazione (PSU) | ATX |
| Certificazione 80 PLUS | 80 PLUS Gold |
| Versione ATX | 2.31 |
| Tecnologia dei cuscinetti | HYB |
| Tempo medio tra guasti (MTBF) | 100000 h |
| Design | |
| Colore del prodotto | Nero |
| Tipo di raffreddamento | Attivo |
| Diametro del ventilatore | 12 cm |
| Numero di ventole | 1 ventola(e) |
| Collocazione ventole | Alto |
| Interrutore On/Off | Sì |
| Dimensioni e peso | |
| Larghezza | 150 mm |
| Profondità | 140 mm |
| Altezza | 86 mm |
| Dati logistici | |
| Codice del Sistema Armonizzato (SA) | 84733020 |
- Purpose
- PC
- Total power
- 750 W
- AC input voltage
- 100 - 240 V
- Motherboard power connector
- 20+4 pin ATX
- Peripheral (Molex) power connectors (4-pin)
- 3
- Power supply unit (PSU) form factor
- ATX
- 80 PLUS certification
- 80 PLUS Gold
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
