Enermax Platimax power supply unit 1700 W 20+4 pin ATX ATX Black
zoom_out_map
chevron_left chevron_right
PLUS

Enermax Platimax power supply unit 1700 W 20+4 pin ATX ATX Black

Enermax Platimax, 1700 W, 220 - 240 V, 1800 W, 50 - 60 Hz, 140 W, 1692 W

€344.99 Tax included

€282.78 Tax excluded

Shipping Rules
Orders placed after 12 noon will be processed the following day (Saturday and Sunday excluded)
check Delivery within 4 working days
Paga in comode rate senza costi né interessi
/mese

Close
VALIDO CON TRIPPODO PLUS

● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.

● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
 
Platimax 1700W The Enermax Platimax 1700 Watt is the royal class power supply. It meets the highest demands on performance and quality to power strong gaming machines, high-end workstations and mining machines. The manufacturer relies on long-life quality components and a complex, highly efficient technical design. In this way, energy losses are reduced to an absolute minimum: Platimax 1700 Watt achieves a peak efficiency of up to 93 percent in the 230-volt network. The power supply convinces with an almost perfect voltage regulation with clean output voltages (extremely low ripple noise) over the entire load range from 0 to 100%. Up to 99% of the total power can be generated via the central 12-volt rails – an ideal prerequisite for the supply of powerful multi-GPU systems.

Efficiency
Platimax 1700 Watt is designed for 230VAC networks and delivers an efficiency of 90 to 93% between 20 to 100% load.

Platimax 1700 Watt helps systems to meet the EU eco-design directive 2013 ErP Lot 6 (< 0.5W in standby mode*) due to a high-efficient 5V standby (+5Vsb) circuitry. Moreover it supports the EU regulation no. 617/2013 demanding amongst others 85% efficiency at 50% load and 82% at 20% and 100% load.
* only in combination with an ErP ready mainboard

Power
The dynamic hybrid transformer topology allows an optimized use of the transformer with less energy loss for a better overall efficiency.

The extreme density transformer design of Platimax 1700W boosts transformer core utilization rate and reduces overall dimension.

A multi-rail design with six 12V rails distributes the power with maximum stability and safety.

Copper-Bridge Array
Innovative and patented transmission technology for direct voltage transmission to reduce the wire-resistance and to increase the efficiency. Optimized air circulation due to clear and spacious PCB design.

FMQ Design
The Full-Zone Magnetic Quadrant Transformer design is a high-performance power supply topology which fully utilizes all magnetic quadrants of the main transformer and achieves maximum switching efficiency and rock stable KW output voltage.

Cooling
Integrated 13.5cm fan with 9 blades and long lasting ball bearing technology ensures optimized cooling of high performance components.

The SpeedGuard fan speed control to ensure effective and silent cooling.

The HeatGuard function keeps the PSU fan running for 30-60 seconds after shut down to dissipate the remaining system heat and prolonging the components lifetime.

Connectivity
The fully modular cable management with flat cables allows an easy system installation and cable routing and improves the air circulation inside the case.

Ten 6+2P (8P) PCI-E connectors to power mutiple high-end graphics cards.

Compatibility
Intel® ATX12V v2.4, compliant with the Intel Power Supply Design Guide for Desktop Platform Form Factors Revision 1.31 April 2013.

Full support of the C6/C7 energy-saving functions of Intel® processors, first introduced with the Haswell™ generation.

Fit4Server, compliant with SSI PSDG for the Intel® Core™ Extreme/i7, Xeon™ and AMD® Opteron™ and downward compatible with EPS12V v2.92, v2.8.

Quality & Safety
5 Years Manufacturer Warranty.

Enermax only uses high-quality components including first-class Japanese 105°C electrolytic capacitors for maximum stability and durability.

Enermax SafeGuard, the multiple protection circuit that keeps the power supply and the system save from damage by short circuit (SCP), over voltage (OVP), under voltage (UVP), over current (OCP), over temperature (OTP), over power (OPP) as well as surges and inrush current (SIP).

Non-Stop 24/7 industrial class performance. Full rated power output at 40°C ambient temperature.

Enermax Platimax. Total power: 1700 W, AC input voltage: 220 - 240 V, Peak power: 1800 W. Motherboard power connector: 20+4 pin ATX, Motherboard power cable length: 65 cm, SATA power cable length: 450,600,750,900 mm. Purpose: PC, Power supply unit (PSU) form factor: ATX, 80 PLUS certification: 80 PLUS Platinum. Product colour: Black, Cooling type: Active, Fan diameter: 13.5 cm. Cables included: AC
Gestione energetica
Potenza totale1700 W
Potenza di picco1800 W
Tensione di ingresso AC220 - 240 V
Frequenza di ingresso AC50 - 60 Hz
Potenza combinata (+3.3V)140 W
Potenza combinata (+12V)1692 W
Potenza combinata (+5V)140 W
Potenza combinata (-12V)6 W
Potenza combinata (+5Vsb)20 W
Corrente massima di uscita (+3.3V)25 A
Corrente massima di uscita (+12V1)20 A
Corrente massima di uscita (+12V2)20 A
Corrente massima di uscita (+12V4)30 A
Corrente massima di uscita (+5V)25 A
Corrente massima di uscita (-12V)0,5 A
Corrente massima di uscita (+5Vsb)4 A
Efficienza94%
Funzionalità di protezione dell'alimentazioneSovracorrente, Sovralimentazione, Sovraccarico, Surriscaldamento, Cortocircuito, Sotto carico
Connettività
Connettore scheda madre20+4 pin ATX
Lunghezza del cavo di alimentazione della scheda madre65 cm
Numero di connettori SATA4
Lunghezza del cavo di alimentazione SATA450,600,750,900 mm
Connettori periferiche (Molex) (4-pin)4
Lunghezza del cavo di alimentazione della periferica (Molex)450,600,750,900 mm
Connettori PCI Express (6+2 pin)2
Lunghezza del cavo di alimentazione PCI Express50 cm
Connettore PCI Express
Tipo di cablaggioModulare
Prestazione
UtilizzoPC
Fattore di forma dell'unità di alimentazione (PSU)ATX
Certificazione 80 PLUS80 PLUS Platinum
Versione ATX2.4
Tempo medio tra guasti (MTBF)100000 h
CertificazioneCE, TÜV, EAC, RCM, WEEE
Design
Colore del prodottoNero
Tipo di raffreddamentoAttivo
Diametro del ventilatore13,5 cm
Numero di ventole1 ventola(e)
Collocazione ventoleAlto
Interrutore On/Off
Condizioni ambientali
Intervallo temperatura di funzionamento0 - 40 °C
Intervallo di temperatura-40 - 70 °C
Range di umidità di funzionamento0 - 85%
Umidità0 - 95%
Dimensioni e peso
Larghezza150 mm
Profondità180 mm
Altezza86 mm
Peso2,25 kg
Dati su imballaggio
Manuale dell'utente
Tipo di imballoScatola
Dettagli tecnici
Certificati di sostenibilitàRoHS
Dati logistici
Codice del Sistema Armonizzato (SA)84733020
Altre caratteristiche
Viti incluse
Numero di viti4
Fascette fermacavo incluse
ENERMAX
EPM1700EGT
3 Items
4713157721150
Purpose
PC
Total power
1700 W
AC input voltage
220 - 240 V
Motherboard power connector
20+4 pin ATX
Peripheral (Molex) power connectors (4-pin)
4
Power supply unit (PSU) form factor
ATX
80 PLUS certification
80 PLUS Platinum

SHIPMENTS

All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).

The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.

The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.

Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.

RIGHT OF WITHDRAWAL

To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.

Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:

APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome

or at the email address info@trippodo.com or by fax at +39 06 99367459.

It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.

It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.

The refund will be made within 14 calendar days from the arrival of the object at our office.

NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.