SilentiumPC Signum SG1X EVO TG ARGB Black
SilentiumPC Signum SG1X EVO TG ARGB, PC, Black, ATX, micro ATX, 16.1 cm, 32.5 cm, 16 cm
SADDYTECH CONSIGLIA TRIPPODO
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
Two trendy tempered glass panels together with the ARGB lighting system allow users showing off their tastefully chosen components, installed inside the SilentiumPC Signum SG1X Evo TG ARGB chassis.
Signum SG1X Evo TG ARGB is a representative of the Signum SG chassis series, which is distinguished not only by two tempered glass panels, but also with an advanced ARGB lighting system. It consists of four Stella HP ARGB 120 mm CF fans, perfectly visible through the glass panel, as well as the advanced Nano-Reset ARGB controller included in the set. This is a well-priced proposition for users who want to build an aesthetic computer with an impressive ARGB lighting.
The hexagonal vents on both sides of the chassis are a part of the unique design characteristic for the Signum family. This kind of pattern of a front panel not only looks great, but it also provides an unobstructed access of the fresh air necessary for effective cooling of the components mounted inside.
Addressable RGB LED lighting system
Signum SG1X Evo TG ARGB is equipped with an addressable LED lighting system in the form of four Stella HP ARGB CF 120 mm fans and Nano-Reset ARGB controller. It is fully compatible with other SilentiumPC ARGB (2+1-pin 5V) devices, such as Navis Evo ARGB, ARGB air coolers, Aurora Stripes ARGB and Stella HP / Corona HP ARGB fans.
Nano-Reset ARGB controller with splitter
The chassis is equipped with Nano-Reset ARGB controller and a splitter, which allows to connect up to 5 fans and 5 ARGB devices. They allow you to cycle through different effects and colors using a RESET button located at the front of the case, even if your rig is not equipped with an ARGB-enabled motherboard (compatible solutions listed below).
High airflow
Modern construction of SilentiumPC Signum SG1X Evo TG ARGB case prioritizes airflow which enables very effective cooling of processor, graphics card and all the other components installed. The out-of-the-box configuration consists of four Stella HP ARGB 120 mm CF fans with users being able to make use of another four fan mounting points.
Four dust filters
In SilentiumPC Signum SG1X Evo TG ARGB case the four dust filters fitted as standard take care of its interiors cleanliness. Two of them are mounted on front, another one under the PSU and finally, one on top of the chassis.
AIO LC compatibility
Signum SG1X Evo TG ARGB offers enough space for the integrated sets of liquid cooling (AIO LC). The 120/240/360 sized ones will fit on front, 120/240 on top (maximum RAM height: 32 mm)and another 120 mm can be installed at the rear of the case.
Stella HP ARGB 120 mm CF
Four illuminated high-pressure fans are responsible for cooling the components inside the Signum SG1X Evo TG ARGB case: Stella HP ARGB 120 mm CF. They ensure high airflow, adapted to the segment and intended use of the case.
I/O panel: 2× USB 3.2 Gen 1
All the important ports and buttons at your fingertips – 2 × USB 3.2 Gen 1, audio ports and POWER and RESET buttons.
SSD mounts behind the motherboard
Two 2,5" devices (e.g. SSD drives) can be mounted in bays designed specifically for this purpose and located behind the motherboard tray. In order to access it, the user has to unscrew the side panel’s bolts and remove it. Such mounted SSDs do not take up space intended for the 3,5" hard drives.
Cable arrangement system
The SilentiumPC Signum SG1X Evo TG ARGB case utilizes advanced cable arrangement system consisting of numerous cutouts, and a plenty of space between the back of the motherboard tray and the inner wall of side panel allows for very precise arrangement of all the cables without obstructing the airflow.
SilentiumPC Signum SG1X EVO TG ARGB. Type: PC, Product colour: Black, Supported motherboard form factors: ATX, micro ATX. Front fans installed: 3x 120 mm, Front fans diameters supported: 120 mm, Rear fans installed: 1x 120 mm. Supported HDD sizes: 2.5,3.5". Width: 216 mm, Depth: 413 mm, Height: 447 mm. Package width: 266 mm, Package depth: 485 mm, Package height: 473 mm
| Design | |
| Tipo | PC |
| Colore del prodotto | Nero |
| Fattore di forma scheda madre supportato | ATX, micro ATX |
| Numero di vani per drive 5.25" | 0 |
| Numero di attacchi da 2.5" | 2 |
| Finestra laterale | Sì |
| Pannello(i) di vetro temprato | Sì |
| Filtro anti polvere | Sì |
| Gestione dei cavi ottimizzata | Sì |
| Tasto reset | Sì |
| Altezza massima dissipatori CPU | 16,1 cm |
| lunghezza massima scheda grafica | 32,5 cm |
| Lunghezza massima PSU | 16 cm |
| Connettività | |
| Quantità porte USB 2.0 | 0 |
| Quantità di porte USB 3.2 Gen 1 (3.1 Gen 1) di tipo A | 2 |
| Quantità di porte USB 3.2 Gen 2 (3.1 Gen 2) di tipo A | 0 |
| Ingresso audio | Sì |
| Uscita audio | Sì |
| Raffreddamento | |
| Ventole anteriori installate | 3x 120 mm |
| Numero massimo di ventole frontali | 3 |
| Diametro delle ventole frontali supportato | 120 mm |
| Rear fans installed | 1x 120 mm |
| Numero massimo ventole posteriori | 1 |
| Diametro delle ventole posteriori supportato | 120 mm |
| Numero massimo di ventole superiori | 2 |
| Diametri delle ventole superiori supportati | 120,140 mm |
| Dimensioni del radiatore anteriore supportate | 120,240,360 mm |
| Dimensioni del radiatore posteriore supportate | 120 mm |
| Dimensioni del radiatore superiore supportate | 120,240 mm |
| Archiviazione | |
| Dimensioni di hard disk drive supportati | 2.5,3.5" |
| Dimensioni e peso | |
| Larghezza | 216 mm |
| Profondità | 413 mm |
| Altezza | 447 mm |
| Peso | 5,54 kg |
| Dati su imballaggio | |
| Larghezza imballo | 266 mm |
| Profondità imballo | 485 mm |
| Altezza imballo | 473 mm |
| Peso dell'imballo | 6,49 kg |
| Dati logistici | |
| Codice del Sistema Armonizzato (SA) | 84733080 |
- Product colour
- Black
- USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity
- 2
- Type
- PC
- USB 2.0 ports quantity
- 0
- USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity
- 0
- USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity
- 0
- Supported motherboard form factors
- ATX, micro ATX
- Number of 3.5" bays
- 2
- Supported HDD sizes
- 2.5,3.5"
- Number of 5.25" bays
- 0
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
