Jonsbo i 100 Pro Silver
Jonsbo i 100 Pro, PC, Silver, DTX, ITX, ABS, Aluminium, Metal, Polycarbonate (PC), 16.6 cm, 37.3 cm
SADDYTECH CONSIGLIA TRIPPODO
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
The Primary purpose of designing i 100 is to try to push the cooling performance and hardware support capabilities to the limit of an ITX case, while keeping the volume within a reasonable size, and ensure the performance of the new generation of CPU/GPU is released. It also satisfies the users’ expectations, the need of compactness.
The Priority of product design is listing basic function, the ID design, the Concept. The final version of i 100 Pro can support 360/280 radiator/AIO cooler, 166mm height air cooler, and 373mm length graphics card. Adjustable single or dual chamber layout, supports three different kind of cooling systems. All the intake with filter(380μm) to keep dust out. Space for full size ATX PSII or SFX power supply, and 3.5” HDD storage.
With supporting flagship hardware, how does i100 manage to keep its size small?
For width control: we ensure the height supports flagship air cooler, by cancel the cable management space behind the motherboard, and using the space next to the fans at top or bottom for cable routing. A cable hole is designed between the power supply and the motherboard to form a better routing path. (The motherboard backplane cable routing design used in today’s ATX case may not suitable for reduced size ITX case)
For the length control:To reduced chassis length, support only most brands of 360/280 radiator.
GPU Vertical mounting + AIO/ liquid cooler
Multi-chamber installation, CPU and GPU in different chamers ( PCI-E raiser cable included)
·GPU support: 345-373mm (L)*160mm(H) *62mm (W) max
(Install side mounted dual SSD : 345mm (L), w/o SSD : 373mm(L))
·CPU cooler height : 77mm max
·Radiator support: 360/280/240/120 (fan +radiator max thickness : 55mm)
·Fan space: 6*12cm / 4*14cm cooling fan ( Optional)
·PSU support: w/o bottom fan: ATX PSII/SFX : 175mm max length
W bottom fan: ATX PSII / SFX:150mm max length
Due to there is one fan on the rear side on Reference design graphics card, and exhaust hot
air toward the PSU, it is recommended to use SFX power supply to increate the gap
for ventilation.
GPU horizontal mounting +Air cooler
Single chamber installation, support flagship air cooler, long graphics card, and standard ATX PSII power supply.
·GPU support: 345-373mm (L)*160mm(H) *62mm (W) max
(Install side mounted dual SSD : 345mm (L), w/o SSD : 373mm(L))
·CPU cooler height ：166MM max
·PSU support: ATX PSII/SFX : 140mm max length
·Fan space: 3*12cm / 2*14cm cooling fan ( Optional)
GPU horizontal mounting +AIO/liquid cooler
Single chamber installation, support 360 AIO/radiator, long graphics card, and SFX power supply (115mm max).
·GPU support: 345-373mm (L)*160mm(H) *62mm (W) max
(Install side mounted dual SSD : 345mm (L), w/o SSD : 373mm(L))
·Radiator support: 360/280/240/120 (fan +radiator max thickness: 55mm)
·PSU support: SFX 115mm max length
·Fan space: 3*12cm / 2*14cm cooling fan ( Optional)
How to solve the common problem of venting issue with glass side panel
The first issue cause heat dissipation cause by the glass side panel, due to there is no vent on the panel, i 100 Pro provide the solution through the six points below:
·Dual 3 x 12cm fan mounting points on top and bottom to form a vertical air circulation .
·Increase the gap between the side panel to the vertical mounted graphics card, based on the maximum thickness of the flagship graphics card RTX3090 (60mm), the space between graphics card to case side panel is about 20mm.
·Increase the gap between vertical mounted graphics card to PSU, the back panel of graphics card to ATX PSU is 12.5mm, to SFX PSU is 35mm.
·Offset the bottom fan to ensure it blow the air directly into the gap for ventilation.
·Low wind damping nylon 380 μm dust filter .
·Adjustable dual layers case stand design to increase the ventilation space under the bottom of the case.
The ventilation gap between vertical graphics card and side tempered glass panel.
Offset the bottom fan design to ensure it blow the air directly into graphics card and the ventilation space.
Based on the maximum thickness of the flagship graphics card RTX3090 (60mm), the gap between the graphics card to side panel is 20mm. Base on the reference design of RTX3080, the gap between the graphics card to side panel is 36mm.
The ventilation gap between horizontal graphics card and side tempered glass panel.
Directly insert the ventilated space between the horizontal graphics card and the side tempered glass panel. Taking the RTX3080 graphics card width 112MM as an example, the distance between the graphics card and the side glass is 59MM.
Adjustable single / multi-chamber design
By flip and shift the motherboard tray, and interchangeable rear panel part, i 100 Pro can realize two motherboard layouts in single or multi-chamber, capable to support air cooler with 166mm height.
PSU bracket/ cable management bracket with three mounting points design
In order to meet the requirement of different installation of liquid / air cooler and ATX PSU/SFX PSU, i 100 Pro’s power supply mounting bracket has three different mounting points.
Cable routing space
The 52mm cable routing space next to 360 radiator at top, and intake fan at the bottom of the case.
There are cable routing space next to both side of the PSU, SFX : 17mm+35mm / ATX PSII: 7mm+20mm.
There are two cable openings between PSU to motherboard, it can meet the cable routing requirements of GPU vertical or horizontal mounting.
There is a cable management bracket under the PSU, which can hide the power cables
To meet the need of dust-proof design.
Top, bottom, and graphics card’s rear panel all fitted with ultrasonic molded Low wind damping nylon 380 μm dust filter.
Method of improvement points
There was no dust filter on exhaust venting opening in most cases. From our actual use and testing, we notice the dust may accumulate on the surface next to the opening for exhausting hot air after system shut down, especially near the surface next to the big vent holes on the PCI bracket.
Jonsbo i 100 Pro. Type: PC, Product colour: Silver, Supported motherboard form factors: DTX, ITX. Supported HDD sizes: 2.5,3.5". Width: 194 mm, Depth: 435 mm, Height: 307 mm. Package width: 550 mm, Package depth: 310 mm, Package height: 450 mm
| Design | |
| Tipo | PC |
| Materiali | ABS, Alluminio, Metallo, Policarbonato (PC) |
| Colore del prodotto | Argento |
| Fattore di forma scheda madre supportato | DTX, ITX |
| Numero di vani per drive 3.5" | 1 |
| Numero di attacchi da 2.5" | 3 |
| Finestra laterale | No |
| Pannello(i) di vetro temprato | No |
| Filtro anti polvere | Sì |
| Pulsante on/off | Sì |
| Altezza massima dissipatori CPU | 16,6 cm |
| lunghezza massima scheda grafica | 37,3 cm |
| Lunghezza massima PSU | 14 cm |
| Alimentazione | |
| Fonte di alimentazione inclusa | No |
| Connettività | |
| Quantità di porte USB 3.2 Gen 1 (3.1 Gen 1) di tipo A | 1 |
| Quantità di porte USB 3.2 Gen 2 (3.1 Gen 2) di tipo C | 1 |
| Ingresso audio | Sì |
| Uscita audio | Sì |
| Archiviazione | |
| Dimensioni di hard disk drive supportati | 2.5,3.5" |
| Dimensioni e peso | |
| Larghezza | 194 mm |
| Profondità | 435 mm |
| Altezza | 307 mm |
| Peso | 6,7 kg |
| Dati su imballaggio | |
| Larghezza imballo | 550 mm |
| Profondità imballo | 310 mm |
| Altezza imballo | 450 mm |
| Peso dell'imballo | 8,8 kg |
- Product colour
- Silver
- USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity
- 1
- Type
- PC
- USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity
- 1
- Supported motherboard form factors
- DTX, ITX
- Number of 3.5" bays
- 1
- Power supply included
- N
- Supported HDD sizes
- 2.5,3.5"
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
