GENESIS Irid 505 ARGB Midi Tower Black, Transparent
GENESIS Irid 505 ARGB, Midi Tower, PC, Black, Transparent, ATX, micro ATX, Mini-ITX, Acrylonitrile butadiene styrene (ABS), Steel, Tempered glass, Gaming
SADDYTECH CONSIGLIA TRIPPODO
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
The front of the case is perforated, while the side panel is made of tempered glass with an aesthetic black print. As many as 4 magically backlit ARGB fans will turn your box into a fine piece of art. Irid 505 ARGB impresses not only with its functionality, but also an unusual range of visual impressions. We want you to be able to spill an impressive aura on the room, which will mark your "I" - Irid 505 ARGB makes it possible.
4 ARGB FANS INCLUDED
If want to be able to rest assured that your PC is running optimally, its hardware components must have the temperature conditions they need. Your mutual comfort is provided by four high-quality, very quiet 120 mm fans with ARGB lighting. If need be, the case can fit more fans - including 140mm!
FANS WITH 3-PIN ARGB CONTROLLER
Every fan included with the Irid 505 ARGB as well as the controller itself have 3-pin 5V ARGB plugs, allowing you to connect the controller to a compatible* motherboard and control the backlight effects. The controller, when not connected to the motherboard, allows for independent backlight adjustment, and is additionally equipped with a 4-pin PWM plug, allowing for fan speed adjustment depending on the system load.
* The ARGB system (5V 3-PIN) is not the same as RGB (12V 4-PIN). Make sure what type of backlighting your disc supports.
FITS 7 SSD'S
To offer you complete freedom of quick-access data management, Irid 505 ARGB allows you to install up to three SSDs. In addition, you have enough space for two standard HDDs (or 2 SSD).
THREE TYPES OF MOTHERBOARD? NO PROBLEM
You can easily fit a Mini-ITX, Micro-ATX and ATX inside without worrying about finding matching components.
FUNCTIONAL USB 3.0 PANEL
For maximum comfort of use, the top of the case comes with as many as four USB ports, including two USB 3.0 port. We have conveniently placed two jacks close to you, so that you can easily plug in your headphones and microphone. All this in addition to a button controlling the phenomenal ARGB lighting, so that you can set it to as you like it.
A CASE WHERE CABLES DISAPPEAR
Genesis Irid 505 ARGB has ample space behind the motherboard tray and many rubber grommets, making cable management a breeze and ensuring a great appearance from the outside.
SLOT-IN MECHANISM FOR DRIVES
The Irid 505 ARGB ensure maximum comfort in using, because we have simplified the installation of the drives by using simple "slot-in" technology. This simple mechanism enables you to install and uninstall SSDs and HDDs without having to break out the tools again.
EQUIP IT WITH LIQUID COOLING UP TO 280 MM
You decide what components go into your PC. If needed, you can install a liquid cooler up to 280 mm! Irid 505 ARGB offers complete freedom when it comes to hardware and a wide range of cooling options.
3 DUST FILTERS
Genesis Irid 505 ARGB offers a clean environment inside the case for a long time. The set includes three dust filters to ensure maximum order. The Irid 503 ARGB has been designed with attention to every detail, ensuring long-term user satisfaction.
ALWAYS-STYLISH EXTENSION PORTS
The plugs of the expansion sockets are screwed on, not broken off, allowing them to be reassembled if necessary. Just open what you need and turn it off when the socket is empty. With Irid 505 ARGB, everything will always look stylish and phenomenal.
GENESIS Irid 505 ARGB. Form factor: Midi Tower, Type: PC, Product colour: Black, Transparent. Power supply location: Bottom. Front fans installed: 3x 120 mm, Rear fans installed: 1x 120 mm. Supported HDD sizes: 2.5,3.5". Width: 220 mm, Depth: 447 mm, Height: 510 mm
| Design | |
| Fattore di forma | Midi Tower |
| Tipo | PC |
| Materiali | Acrilonitrile butadiene stirene (ABS), Acciaio, Vetro temperato |
| Colore del prodotto | Nero, Trasparente |
| Fattore di forma scheda madre supportato | ATX, micro ATX, Mini-ITX |
| Numero di vani per drive 3.5" | 2 |
| Numero di attacchi da 2.5" | 7 |
| Numero di vani per drive interni 3.5" | 2 |
| numero di slot espansivi | 6 |
| Finestra laterale | Sì |
| Adatto per | Giocare |
| Illuminazione | Sì |
| colore d'illuminazione | Multi |
| posizione delle illuminazioni | Ventole |
| Pannello(i) di vetro temprato | Sì |
| Filtro anti polvere | Sì |
| Gestione dei cavi ottimizzata | Sì |
| Pulsante on/off | Sì |
| Indicatori LED | Sì |
| Altezza massima dissipatori CPU | 16,5 cm |
| lunghezza massima scheda grafica | 38 cm |
| Lunghezza massima PSU | 19 cm |
| Alimentazione | |
| Fonte di alimentazione inclusa | No |
| Posizione alimentazione | Fondo |
| Connettività | |
| Quantità porte USB 2.0 | 2 |
| Quantità di porte USB 3.2 Gen 1 (3.1 Gen 1) di tipo A | 2 |
| Ingresso audio | Sì |
| Uscita audio | Sì |
| Raffreddamento | |
| Ventole anteriori installate | 3x 120 mm |
| Rear fans installed | 1x 120 mm |
| Archiviazione | |
| Dimensioni di hard disk drive supportati | 2.5,3.5" |
| Numero di hard drive supportati | 9 |
| Dimensioni e peso | |
| Larghezza | 220 mm |
| Profondità | 447 mm |
| Altezza | 510 mm |
| Peso | 6,95 kg |
- Product colour
- Black, Transparent
- USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity
- 2
- Type
- PC
- Form factor
- Midi Tower
- USB 2.0 ports quantity
- 2
- Supported motherboard form factors
- ATX, micro ATX, Mini-ITX
- Number of 3.5" bays
- 2
- Power supply included
- N
- Supported HDD sizes
- 2.5,3.5"
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
