ENDORFY Arx 700 ARGB Tower Black
zoom_out_map
chevron_left chevron_right
PLUS

ENDORFY Arx 700 ARGB Tower Black

ENDORFY Arx 700 ARGB, Tower, PC, Black, ATX, ITX, micro ATX, Multi, Case fans

€161.49 Tax included

€132.37 Tax excluded

Shipping Rules
Orders placed after 12 noon will be processed the following day (Saturday and Sunday excluded)
check Delivery within 3 working days
Paga in comode rate senza costi né interessi
/mese

Close
SADDYTECH CONSIGLIA TRIPPODO

VALIDO CON TRIPPODO PLUS

● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.

● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
 
We know a lot about PC cases, and it's hard to surprise us, but our eyes still light up at the sight of the ENDORFY Arx 700 ARGB (and we see this beauty every day). We’ve put the best of our knowledge and experience into it – and it sure is a winner.
This is so far the largest PC case (486×228×472 mm) available with the ENDORFY logo. The ENDORFY Arx 700 ARGB will be a perfect fit for your components – such as a tall cooling system (up to 179 mm), 8 fans (including 4 Stratus 140 PWM ARGB which you get for a good start), and virtually any available graphics card (up to 410 mm). It also keeps them in a light draft, like a crisp morning breeze on a mountain meadow – thanks to the mesh panels on the front and top.

We will, we will freeze you!
We have a message that will freeze you. Literally, because the Arx 700 ARGB is as cold as the heart of a guild buddy who won’t lend you gold for new armor. Simply put – your components keep a low temperature even when you squeeze the last drops of juice out of your PC.
All thanks to the Arx 700 ARGB‘s spacious interior with room for 8 freezers fans. What’s more, the front and top panels are also filters, so there’s no need for additional dust covers. Compared to traditional solutions, a single layer of filters improves air circulation and makes it easier to keep the components in a pleasant breeze (because cooling is extremely important to us). Your mom will be proud of this (ours already are).

Heart made of stone fans
We sometimes say that the heart of the Arx 700 ARGB is made of stone fans. And not just any fans – we mean the 4 Stratus 140 PWM ARGB fans, we developed in cooperation with Synergy Cooling. We also added a splitter, so you can control their speed with a PWM signal from one motherboard connector.
The Stratus 140 PWM ARGB is our colorful pride and joy. Its 14 cm height combined with the optional semi-passive mode is perfect for providing great airflow inside the PC case. Plus, the fan runs on a durable FDB bearing, so you can work (and play) in silence even in extreme conditions. Some even think that our Arx 700 ARGB would do well in a survival camp, but we haven't tested it. Yet.

No thick filters
Great products don't need (thick) filters – especially when it comes to PC cases. The double dust cover protects against dirt, but at the same time it restricts the airflow like a synthetic costume at a cosplay convention. We get hot just thinking about it!
That’s why the Arx 700 ARGB has – drumroll, please – a top and front mesh panel that serve as filters.
Thanks to them, our PC case is as airy as a mountain meadow in spring, and you don’t have to install any additional protection against dust and dirt. Each of the filters can be removed and cleaned with a cloth or vacuum cleaner (or simply rinsed under running water) – and you’ll do it in less time than it took you to read this description.

1,000 points for looks
We respect closed PC cases – they hide components beautifully and match minimalist desks. But when you want to show off your epic components (or turn on ARGB inside), it's the tempered glass side that does the job. And it gives you an extra 1000 points for looks – that's why we put it in the Arx 700 ARGB.

Everything in place
If we were to describe the Arx 700 ARGB in a few words, we’d say that it's got everything in the right place. It's our biggest case (at least for now), so you can easily fit all your treasures in there. In such a space, they’ll feel like standing next to an open window.
Or two – YOLO.
The Arx 700 ARGB is 486×228×472 mm. That's plenty of room for everything you need to live win – including a tall cooling system (up to 179 mm), 8 fans (4 of which you get from us for a good start) and simultaneously two radiators up to 360 mm which guarantees efficient cooling of the most demanding builds.
It’ll also fit virtually any graphics card available on the market (up to 410 mm) and power supply – you can place it in whatever position is most convenient for you. You can put it together in a flash, thanks in part to the special mounting frame. We tested it ourselves.

ARGB-bright future
Good news! With our PC case, the ARGB-bright future awaits you. Literally – because with the Arx 700 ARGB, it only takes one click to create an epic aurora over your desk (the RESET button is responsible for the control). Some say it's because of the low temperature in the case – but the truth is that ARGB fans are spinning inside.
They allow you to light up your PC the way you want. The 4 Stratus 140 PWM ARGB fans (pre-installed for your convenience) give you the option of any lighting configuration. You can set them up in an instant thanks to the built-in PWM and ARGB controllers – all combined into one functional package that is compatible with ENDORFY ARGB-labeled products (and compatible products from other manufacturers). This means that you can easily synchronize the backlight of the entire set based on the Arx 700 ARGB – even if it’s your very first build.
Because your PC is meant to be for you, not the other way around.

ENDORFY Arx 700 ARGB. Form factor: Tower, Type: PC, Product colour: Black. Front fans installed: 3x 140 mm, Rear fans installed: 1x 140 mm, Fan speed: 200 - 1200 RPM. Supported HDD sizes: 2.5,3.5", SSD form factor: 2.5". Width: 228 mm, Depth: 472 mm, Height: 486 mm. Package width: 290 mm, Package depth: 540 mm, Package height: 528 mm
Design
Fattore di formaTower
TipoPC
Colore del prodottoNero
Fattore di forma scheda madre supportatoATX, ITX, micro ATX
Numero di vani per drive 3.5"1
Numero di attacchi da 2.5"6
numero di dispositivi di archivio supportati7
numero di slot espansivi7
Finestra laterale
Illuminazione
colore d'illuminazioneMulti
posizione delle illuminazioniVentole
Filtro anti polvere
Pulsante on/off
Altezza massima dissipatori CPU17,9 cm
lunghezza massima scheda grafica41 cm
Lunghezza massima PSU34 cm
Alimentazione
Fonte di alimentazione inclusaNo
Connettività
Quantità porte USB 2.02
Ingresso audio
Uscita audio
Quantità di porte USB Tipo C1
Raffreddamento
Ventole anteriori installate3x 140 mm
Numero massimo di ventole frontali3
Rear fans installed1x 140 mm
Velocità ventole200 - 1200 Giri/min
Dimensioni del radiatore anteriore supportate120,240,280,360 mm
Dimensioni del radiatore posteriore supportate120,240 mm
Dimensioni del radiatore superiore supportate120,240,280,360 mm
Archiviazione
Dimensioni di hard disk drive supportati2.5,3.5"
Alloggiamento combo HDD/SSD
Dimensione SSD2.5"
Dimensioni e peso
Larghezza228 mm
Profondità472 mm
Altezza486 mm
Peso8,5 kg
Dati su imballaggio
Larghezza imballo290 mm
Profondità imballo540 mm
Altezza imballo528 mm
Peso dell'imballo9,7 kg
ENDORFY
EY2A013
199 Items
5903018666327
Product colour
Black
Type
PC
Form factor
Tower
USB 2.0 ports quantity
2
Supported motherboard form factors
ATX, ITX, micro ATX
Number of 3.5" bays
1
Power supply included
N
Supported HDD sizes
2.5,3.5"

SHIPMENTS

All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).

The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.

The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.

Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.

RIGHT OF WITHDRAWAL

To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.

Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:

APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome

or at the email address info@trippodo.com or by fax at +39 06 99367459.

It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.

It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.

The refund will be made within 14 calendar days from the arrival of the object at our office.

NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.