Aerocool Visor Midi Tower Black
Aerocool Visor, Midi Tower, PC, Black, ATX, EATX, micro ATX, Mini-ITX, Acrylonitrile butadiene styrene (ABS), SPCC, Steel, Gaming
SADDYTECH CONSIGLIA TRIPPODO
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
Access 16.8 million colors using compatible ARGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion. Addressable RGB can be controlled using any of two ways: LED control button or ARGB motherboard.
WIDE AND STURDY CHASSIS DESIGN
Featuring a chassis design focused on delivering increased interior space, you now have more freedom and possibilities to customize your PC how you want.
With more room for your graphics card, coolers and fans, and even your motherboard, the Visor will allow you to fully maximize the performance of your PC build.
DESIGNED FOR OPTIMAL GRAPHICS CARD INSTALLATION
Built with three additional vertical expansion slots, allowing you to install your graphics card at a vertical position.
Includes a GPU bracket that keeps your graphics card stable and secure while preventing it from sagging.
ADDRESSABLE RGB COMPATIBLE
Access 16.8 million colors using compatible ARGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion (with 5V 3-Pin ARGB header).
Addressable RGB can be controlled using any of two ways: LED control button or ARGB motherboard.
6-PORT RGB CONTROL HUB
Features a 6-port hub with PWM control functions and allows you to connect up to six 6-Pin AeroCool Addressable RGB fans and up to two 3-Pin Addressable RGB accessories with +5V ARGB connector.
Motherboard connector supports Addressable RGB motherboards (Asus Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion).
PWM COMPATIBILITY
Please check if the 4-Pin fan header on your motherboard is PWM compatible.
- PWM based – PWM compatible
- Voltage based – not PWM compatible
TWO ADDRESSABLE RGB FANS INCLUDED
Comes equipped with one 14cm ARGB fan in the front and one 14cm ARGB fan in the rear of the case to add a stylish flair to your rig.
STYLISH RGB FRONT PANEL DESIGN
Featuring a V-shaped RGB LED front panel design, this case delivers a dynamic yet elegant look and feel to your gaming setup.
Bring your case to life with 23 preset lighting modes that can be readily controlled via LED control button.
E-ATX MOTHERBOARD SUPPORT
With support for E-ATX motherboards, this mid tower case is built for maximum performance.
BUILT FOR HIGH PERFORMANCE
- Supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards
- Supports CPU coolers up to 180mm
- Supports high-end graphics cards up to 387mm (without front radiator)
EFFICIENT CABLE MANAGEMENT
Comes equipped with six rubber cable grommets and two cable passthrough tubes (includes two additional tubes) on the motherboard tray to keep your cables neat, tidy, and secure.
FULL TEMPERED GLASS SIDE PANEL
Comes equipped with a full tempered glass side panel to showcase the inside of your rig while putting your components on full display.
IMPROVED AIR VENTILATION
Mesh front panel design increases air flow and ventilation while allowing for viewing of your front LED fan.
AIR COOLING
Supports air cooling in the front, top, and rear of the case to enhance cooling performance.
- Front: 120mm x 3 or 140mm x 3 (140mm ARGB Fan x 1 included)
- Top: 120mm x 2 or 140mm x 2 (Max.)
- Rear: 120mm x 1 or 140mm x 1 (140mm ARGB Fan x 1 included)
LIQUID COOLING
Supports liquid cooling in the front, top, and rear of the case for maximum efficiency cooling.
- Front: 120/240/280/360mm Radiator (Optional)
- Top: 240mm Radiator (Optional)
- Rear: 120mm Radiator (Optional)
CONVENIENT ACCESS TO YOUR MEDIA
Quick and easy access to LED control button, 2 x USB 3.0, HD audio and mic ports, and power & reset button.
STORAGE CAPABILITY
Supports up to 3 x 3.5” HDDs (2 x 3.5” and 1 x 3.5”/2.5″) and 5 x 2.5” SSDs (4 x 2.5” and 1 x 2.5”/3.5”).
EASY MAINTENANCE
Comes equipped with removable dust filters for convenient cleaning and maintenance.
Aerocool Visor. Form factor: Midi Tower, Type: PC, Product colour: Black. Supported power supply form factors: ATX. Front fans diameters supported: 120,140 mm, Rear fans diameters supported: 120,140 mm, Top fans diameters supported: 120,140 mm. Supported HDD sizes: 2.5,3.5". Width: 230 mm, Depth: 491 mm, Height: 502 mm
| Design | |
| Fattore di forma | Midi Tower |
| Tipo | PC |
| Materiali | Acrilonitrile butadiene stirene (ABS), SPCC, Acciaio |
| Colore del prodotto | Nero |
| Fattore di forma scheda madre supportato | ATX, EATX, micro ATX, Mini-ITX |
| Numero di vani per drive 3.5" | 3 |
| Numero di attacchi da 2.5" | 5 |
| numero di slot espansivi | 10 |
| Finestra laterale | Sì |
| Adatto per | Giocare |
| Illuminazione | Sì |
| colore d'illuminazione | Blu, Verde, Rosso |
| posizione delle illuminazioni | Frontale |
| Pannello(i) di vetro temprato | Sì |
| Gestione dei cavi ottimizzata | Sì |
| Pulsante on/off | Sì |
| Altezza massima dissipatori CPU | 18 cm |
| lunghezza massima scheda grafica | 38,7 cm |
| Alimentazione | |
| Fonte di alimentazione inclusa | No |
| Fattori di forma di alimentazione supportati | ATX |
| Connettività | |
| Quantità di porte USB 3.2 Gen 1 (3.1 Gen 1) di tipo A | 2 |
| Ingresso audio | Sì |
| Uscita audio | Sì |
| Raffreddamento | |
| Numero massimo di ventole frontali | 3 |
| Diametro delle ventole frontali supportato | 120,140 mm |
| Numero massimo ventole posteriori | 1 |
| Diametro delle ventole posteriori supportato | 120,140 mm |
| Numero massimo di ventole superiori | 2 |
| Diametri delle ventole superiori supportati | 120,140 mm |
| capacità raffreddamento liquidi | Sì |
| Dimensioni del radiatore anteriore supportate | 120,240,280,360 mm |
| Dimensioni del radiatore posteriore supportate | 120 mm |
| Dimensioni del radiatore superiore supportate | 120,240 mm |
| Archiviazione | |
| Dimensioni di hard disk drive supportati | 2.5,3.5" |
| Dimensioni e peso | |
| Larghezza | 230 mm |
| Profondità | 491 mm |
| Altezza | 502 mm |
| Spessore del materiale | 0,7 mm |
- Product colour
- Black
- USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity
- 2
- Type
- PC
- Form factor
- Midi Tower
- Supported motherboard form factors
- ATX, EATX, micro ATX, Mini-ITX
- Number of 3.5" bays
- 3
- Power supply included
- N
- Supported HDD sizes
- 2.5,3.5"
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
