Kolink Classic Power power supply unit 500 W 20+4 pin ATX Black
Kolink Classic Power, 500 W, 230 V, 50 Hz, 4 A, Active, 100 W
Kolink Classic Power: Full performance and high efficiency
The 500 Watt model of the Classic Power series offered here has enough connections and performance for fast gaming computers with basic equipment. The PSU delivers up to 444W and 37A on the +12V rail while providing 100W and 15A each on the +3.3V and +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU and exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSU's highly efficient circuit design features independent DC-to-DC converters for the 3.3V and 5V outputs, ensuring extremely precise voltage regulation.
Each example of Classic-Power series is cooled by a 120 mm fan with durable and quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan and thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU and two 6+2 pin connectors for dedicated graphics cards. Four SATA and two Molex connectors are available for additional components. The flat, flexible and completely black cables have a modern look and fit into almost any up-to-date gaming setup.
Kolink Classic Power. Total power: 500 W, AC input voltage: 230 V, AC input frequency: 50 Hz. Motherboard power connector: 20+4 pin ATX, Cabling type: Non-Modular. Purpose: PC, 80 PLUS certification: 80 PLUS Bronze, Supported motherboard form factors: ATX. Product colour: Black, Fan diameter: 12 cm, Number of fans: 1 fan(s). Width: 150 mm, Depth: 160 mm, Height: 86 mm
Gestione energetica | |
Potenza totale | 500 W |
Tensione di ingresso AC | 230 V |
Frequenza di ingresso AC | 50 Hz |
Corrente d'ingresso | 4 A |
Tipo di correttore del fattore di potenza (PFC) | Attivo |
Potenza combinata (+3.3V) | 100 W |
Potenza combinata (+12V) | 444 W |
Potenza combinata (+5V) | 100 W |
Potenza combinata (-12V) | 3 W |
Potenza combinata (+5Vsb) | 12,5 W |
Corrente massima di uscita (+3.3V) | 15 A |
Corrente massima di uscita (+12V) | 37 A |
Corrente massima di uscita (+5V) | 15 A |
Corrente massima di uscita (-12V) | 0,3 A |
Corrente massima di uscita (+5Vsb) | 2,5 A |
Efficienza | 85% |
Funzionalità di protezione dell'alimentazione | Sovracorrente, Sovraccarico, Sovraccarico, Cortocircuito, Sotto carico |
Connettività | |
Connettore scheda madre | 20+4 pin ATX |
Numero di connettori SATA | 4 |
Connettori periferiche (Molex) (4-pin) | 2 |
Connettore di alimentazione EPS (4+4 poli) | Sì |
Connettori PCI Express (6+2 pin) | 2 |
Connettore ATX (20+4-PIN) | Sì |
Tipo di cablaggio | Non modulare |
Prestazione | |
Utilizzo | PC |
Certificazione 80 PLUS | 80 PLUS Bronze |
Fattore di forma scheda madre supportato | ATX |
Versione ATX | 2.4 |
EPS version | 2.92 |
Tecnologia dei cuscinetti | Sleeve |
Design | |
Colore del prodotto | Nero |
Diametro del ventilatore | 12 cm |
Numero di ventole | 1 ventola(e) |
Collocazione ventole | Alto |
Interrutore On/Off | Sì |
Dimensioni e peso | |
Larghezza | 150 mm |
Profondità | 160 mm |
Altezza | 86 mm |
- Purpose
- PC
- Total power
- 500 W
- AC input voltage
- 230 V
- Motherboard power connector
- 20+4 pin ATX
- Peripheral (Molex) power connectors (4-pin)
- 2
- 80 PLUS certification
- 80 PLUS Bronze
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.