SilentiumPC Vero M3 power supply unit 600 W 24-pin ATX ATX Black
SilentiumPC Vero M3, 600 W, 220 - 240 V, 50 Hz, 5 A, Active, 97 W
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
The high performance of the Vero M3 600 W Bronze is the result of using proven high-end components, previously known rather from higher segments. Its basis are DC-DC converters as well as Taiwanese electrolytic and aluminum-polymer (solid state) Teapo capacitors, all certified to operate at temperatures up to 105⁰C.
The semi-modular Vero M3 600 W ATX computer power supply means very high efficiency, confirmed by 80 PLUS® Bronze 230V certificate, modern and efficient DC-DC converters, extremely powerful single +12 V line, very quiet operation in a large load range, as well as a rich set of black, flat and partly detachable wiring.
80 Plus® Bronze certificate
The high efficiency of the Vero M3 600 W has been confirmed by the 80 PLUS® Bronze certificate. The measured efficiency of the power supply meets the requirements of the standard with a great deal: about 87% at 20% load, ~ 90% at 50% and over 87% at a demand equal to the maximum power of the power supply.
Quiet Sigma HP 120 fan
High efficiency means not only lower energy bills, but also less heat generated, and thus lower temperatures inside the power supply and its quieter operation. Thanks to this, a thermally controlled Sigma HP 120 mm fan with HBS bearing can operate at a very low speed (up to 750 RPM) up to half the rated power of the Vero M3 600 W semi-modular power supply. However, even at higher demand the fan does not spin above 1000 RPM: up to about 500 W. Thus, the noise generated by the fan is clearly quieter than in the previous family of Vero L2 / M2 power supplies.
Powerful +12 V line for modern processors and graphics cards
One powerful +12 V line allows great freedom in computer configuration, regardless of whether it is to be a set for the gamer – with a balanced load generated by the processor and graphics card - or a workstation with an above-average performance and a demanding CPU. The Vero M3 600 W is able to provide 588 W on a +12 V line on a continuous basis.
Wide array of protections
The security of the Vero M3 600 W and components it is powering is supervised by a full set of protections, such as short circuit protection (SCP), overload protection (OVP), against too low (UVP) or high (OVP) voltage or against inrush currents.
Semi-modular and flat cabling with rich set of connectors
The Vero M3 Bronze 600 W is partly modular: always used 24-pin ATX and 8-pin EPS wires (two connectors in 4 + 4 system) are permanently attached, while the rest of the wiring (including 2 separate PCI-E bundles, MOLEX and SATA) is modular and can be freely disconnected / connected depending on the current needs of the user. In addition, all cables are flat, which allows them to be easily distributed inside the chassis while improving air circulation.
SilentiumPC Vero M3. Total power: 600 W, AC input voltage: 220 - 240 V, AC input frequency: 50 Hz. Motherboard power connector: 24-pin ATX, Motherboard power cable length: 57 cm, SATA power cable length: 500 mm. Purpose: PC, Power supply unit (PSU) form factor: ATX, 80 PLUS certification: 80 PLUS Bronze. Product colour: Black, Cooling type: Active, Fan diameter: 12 cm. Weight: 1.79 kg
| Gestione energetica | |
| Potenza totale | 600 W |
| Tensione di ingresso AC | 220 - 240 V |
| Frequenza di ingresso AC | 50 Hz |
| Corrente d'ingresso | 5 A |
| Tipo di correttore del fattore di potenza (PFC) | Attivo |
| Potenza combinata (+3.3V) | 97 W |
| Potenza combinata (+12V) | 588 W |
| Potenza combinata (+5V) | 97 W |
| Potenza combinata (-12V) | 3,6 W |
| Potenza combinata (+5Vsb) | 12,5 W |
| Corrente massima di uscita (+3.3V) | 15 A |
| Corrente massima di uscita (+12V) | 49 A |
| Corrente massima di uscita (+5V) | 15 A |
| Corrente massima di uscita (-12V) | 0,3 A |
| Corrente massima di uscita (+5Vsb) | 2,5 A |
| Funzionalità di protezione dell'alimentazione | Sovralimentazione, Sovraccarico, Cortocircuito, Sotto carico |
| Connettività | |
| Connettore scheda madre | 24-pin ATX |
| Lunghezza del cavo di alimentazione della scheda madre | 57 cm |
| Numero di connettori SATA | 7 |
| Lunghezza del cavo di alimentazione SATA | 500 mm |
| Connettori periferiche (Molex) (4-pin) | 2 |
| Connettore di potenza EPS (8-Pin) | Sì |
| Connettori PCI Express (6+2 pin) | 2 |
| Lunghezza del cavo di alimentazione PCI Express | 55 cm |
| Tipo di cablaggio | Semi-modulare |
| Prestazione | |
| Utilizzo | PC |
| Fattore di forma dell'unità di alimentazione (PSU) | ATX |
| Certificazione 80 PLUS | 80 PLUS Bronze |
| Versione ATX | 2.31 |
| EPS version | 2.92 |
| Tecnologia dei cuscinetti | HDB |
| Design | |
| Colore del prodotto | Nero |
| Tipo di raffreddamento | Attivo |
| Diametro del ventilatore | 12 cm |
| Numero di ventole | 1 ventola(e) |
| Dimensioni e peso | |
| Peso | 1,79 kg |
| Dati su imballaggio | |
| Larghezza imballo | 295 mm |
| Profondità imballo | 245 mm |
| Altezza imballo | 92 mm |
| Peso dell'imballo | 2,19 kg |
| Dati logistici | |
| Codice del Sistema Armonizzato (SA) | 84733020 |
- Purpose
- PC
- Total power
- 600 W
- AC input voltage
- 220 - 240 V
- Motherboard power connector
- 24-pin ATX
- Peripheral (Molex) power connectors (4-pin)
- 2
- Power supply unit (PSU) form factor
- ATX
- 80 PLUS certification
- 80 PLUS Bronze
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
