Enermax ETS-T50 Processor Cooler 12 cm White
Enermax ETS-T50, Cooler, 12 cm, 1600 RPM, 24 dB, 71.32 cfm, 121.17 m³/h
SADDYTECH CONSIGLIA TRIPPODO
VALIDO CON TRIPPODO PLUS
● Prodotto nuovo.
● Garanzia 24 mesi.
● Soddisfatto o rimborsato 30 giorni.
● Lavorazione entro 1/2 giorni lavorativi.
● Consegna entro 4 giorni lavorativi.
● Sabato e Domenica esclusi.
● Gli ordini effettuati dopo le 13.00 verranno elaborati il giorno seguente.
The ETS-T50 AXE ARGB is not only a powerful CPU cooler, but also sets itself apart by its addressable RGB lighting. The five 6mm heatpipes in combination with the innovative airflow optimization technologies achieve a cooling performance of up to 230W TDP. For fast heat transfer, the Heat Pipe Direct Touch technology is used, where the copper heatpipes make direct contact with the CPU. An asymmetrical heat sink design leaves room for the installation of high RAM modules. The cooler is equipped with a 12 cm high-pressure fan with patented Twister Bearing technology and addressable RGB LEDs. The lighting supports synchronization with addressable RGB LED technologies from Asus, Asrock, MSI, Gigabyte and Razer. The mounting system with its own backplate allows secure mounting with high contact pressure and brings compatibility to all common Intel and AMD CPUs.
Design
The ETS-T50 AXE ARGB is a tower design cooler with heat pipe transfer. The cooler is equipped with addressable RGB LEDs. For stand-alone operation the fan displays the rainbow RGB lighting effect. Synchronizable RGB lighting via addressable RGB headers of motherboards from Asus, Asrock, MSI and Gigabyte. Programmable lighting effects via motherboards software. Razer Chroma support with compatible motherboards of Asrock and MSI. Note: Addressable RGB LEDs run on 5V, do not connect them to a non-addressable 4 pin header with 12V.
Pressure Differential Flow Design (PDF)
Conical tunnels create an air pressure difference, which increases the air flow up to 15% and allows the heat to be dissipated more quickly.
Vortex Generator Flow (VGF)
In aviation, spoilers, the so-called vortex generators, are used to guide the airflow evenly along the wings. Enermax engineers have applied this technology to the CPU heat sink: Small spoilers on the fins next to the heatpies create a vortex which brings more fresh air to the back of the heatpipes.
Vacuum Effect Flow (VEF)
The partially closed sides of the heat sink create a vacuum that additionally draws fresh air from the side.
Heat Pipe Direct Touch (HDT)
With the patented Heat Pipe Direct Touch technology the heat pipes rest directly on the CPU. The advantage against a base plate is the faster transfer of heat without any additional resistance.
Asymmetric Heat Pipe Design
The asymmetrical heatpipe design creates additional space for the fan to prevent high RAM modules from being blocked.
Enermax High Pressure Blade
The ETS-T50 AXE ARGB is equipped with a 12cm High Pressure Blade fan designed for use on CPU coolers. The patented Twister Bearing technology ensures smooth operation and a long service life of up to 160,000 hours MTBF. The 9 High Pressure Blades rotate at a wide rage of 500 – 1.600 RPM to support ultra silent operation and high cooling performance.
Thermal Conductive Coating
The Thermal Conductive Coating is a thin protective layer that prevents oxidation without compromising the heat transfer.
Air Guide
The Air Guide on the back of the cooler provides air flow control for perfect adaptation to the needs of the case.
Compatibility
Quick & user-friendly universal mounting system supporting Intel and AMD sockets (excluding TR4/SP3 socket). The pressure adjustment spring system and high conductive Dow-Corning thermal grease ensures a perfect contact with the CPUs heat spreader.
Enermax ETS-T50. Type: Cooler, Fan diameter: 12 cm, Rotational speed (min): 500 RPM, Rotational speed (max): 1600 RPM, Noise level (low speed): 14 dB, Noise level (high speed): 24 dB, Maximum airflow: 71.32 cfm, Airflow: 121.17 m³/h, Minimum air pressure: 0.67 mmH2O, Maximum air pressure: 3.07 mmH2O, Bearing type: Twister bearing. Width: 138.7 mm, Depth: 112.5 mm, Height: 160 mm. Product colour: White
| Performance | |
| Suitable location | Processor |
| Type | Cooler |
| Fan diameter | 12 cm |
| Supported processor sockets | LGA 1366 (Socket B), LGA 2011-v3 (Socket R), LGA 2066, LGA 775 (Socket T), Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket FM1, Socket FM2, Socket FM2+ |
| Rotational speed (min) | 500 RPM |
| Rotational speed (max) | 1600 RPM |
| Noise level (low speed) | 14 dB |
| Noise level (high speed) | 24 dB |
| Minimum airflow (imperial) | 23.81 cfm |
| Maximum airflow | 71.32 cfm |
| Airflow | 121.17 m³/h |
| Minimum air pressure | 0.67 mmH2O |
| Maximum air pressure | 3.07 mmH2O |
| Bearing type | Twister bearing |
| Design | |
| Product colour | White |
| Number of fan blades | 9 |
| Fins material | Aluminium |
| Number of heat pipes | 5 |
| Illumination LED | Y |
| Illumination colour | Blue, Green, Red |
| Fan connector | 4-pin |
| Power | |
| Rated voltage | 12 V |
| LED voltage | 5 V |
| Weight & dimensions | |
| Width | 138.7 mm |
| Depth | 112.5 mm |
| Height | 160 mm |
| Weight | 860 g |
| Fan dimensions (W x D x H) | 120 x 120 x 25 mm |
| Heat pipes diameter | 6 mm |
| Package width | 222 mm |
| Package depth | 175 mm |
| Package height | 130 mm |
| Package weight | 1.44 kg |
| Packaging content | |
| Mounting kit | Y |
| Other features | |
| Thermal grease | Y |
| Heatsink dimensions (W x D x H) | 135.2 x 65 x 160 mm |
| Logistics data | |
| Harmonized System (HS) code | 84733080 |
| Master (outer) case width | 460 mm |
| Master (outer) case length | 370 mm |
| Master (outer) case height | 295 mm |
| Master (outer) case gross weight | 12 kg |
| Products per master (outer) case | 8 pc(s) |
- Product colour
- White
- Type
- Cooler
- Suitable location
- Processor
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.
