Aqua Computer 53293 computer cooling system part/accessory Flow meter
Aqua Computer 53293, Flow meter, Black, 1/4", 51 mm, 43 mm, 34 mm
Flow measurement
Coolant flowing through the sensor drives a rotor/impeller, a contactless magnetic sensor system detects the rotation speed. Each sensor is calibrated for optimum bearing play to achieve minimum operation noise. The sensor delivers reliable readings over a wide range of flow rates between 35 l/h and 1000 l/h (approximately 9 to 260 US liquid gallons per hour) and is therefore perfectly suited for most water cooling systems. Due to a symmetrical construction, the flow direction is irrelevant. Furthermore, the sensor may be installed in any orientation. Due to its low flow resistance, this sensor is a perfect match for high flow water cooling systems.
The high flow NEXT is equipped with two sensors for rotor speed detection. Combined with an intelligent sensor evaluation, this results in in a four times higher resolution compared to the other flow sensors of our high flow series. Pre-configured calibration curves stored in the integrated electronics result in high precision flow rate detection, with calibration data provided for DP Ultra and pure water as well as for different types of fittings.
Sensor for coolant quality
A very precise measuring system for the electrical conductivity of the coolant is integrated into the high flow NEXT. It is capable to measure the conductivity between 2-200 µS and determine the quality of the coolant. If corrosion occurs or if the corrosion protection inhibitors are used up, the conductivity of the coolant increases significantly. In this case, the coolant should be replaced.
Sensor for coolant temperature
The high flow NEXT is equipped with a very precise and fast water temperature sensor.
Highly integrated electronics
The refined electronics are features an OLED display, alarm buzzer and full RGBpx system. Power supply and communication with the PC are provided by USB interface.
The display and three buttons allow a simple and direct configuration of the sensor. The graphical display can show all measured values either as numbers or diagrams. All display pages are user-selectable and can be changed automatically.
All sensors values can be monitored with alarm limits. If an alarm occurs, it can be indicated both acoustically via the integrated buzzer and optically using the LEDs. In addition, the signal output connector can be used to forward alarm information. The signal output can also be configured to generate a flow signal for another connected device or a fan speed signal for the motherboard (100 l/h resulting in 1000 rpm).
Using the aquabus interface, data can be forwarded from the high flow NEXT to a connected aquaero 5/6 controller. The aquabus interface can also be used for power supply (instead of USB), but in this case the RGBpx functionality will not be available.
RGBpx controller for addressable LEDs
To provide a visual flow control, the sensor has ten integrated RGBpx LEDs. In their default configuration, they provide a rotating flow indicator which changes the speed depending on the flow rate. Other effects can be configured using the aquasuite.
Additionally, the high flow NEXT is equipped with an RGBpx output for controlling up to 90 addressable LEDs independently. Color and brightness can be individually controlled for each LED. In total, up to six groups of LEDs of varying size can be configured, and visual effects can be assigned to each group. The 23 available effects can be extensively adjusted for further customization. Many effects can also be configured to modify effect parameters (for example speed) depending on current sensor data. The available effects also include sound-to-light effects, visualizing computer sound output. The AMBIENTpx effect deserves special notice, replicating the border area of the current monitor display on connected LEDs, allowing for an impressive background lighting surrounding the monitor.
Aqua Computer 53293. Type: Flow meter, Product colour: Black, Connecting thread: 1/4". Width: 51 mm, Depth: 43 mm, Height: 34 mm. Quantity per pack: 1 pc(s)
Caratteristiche | |
Tipo | Flussimetro |
Colore del prodotto | Nero |
Filo di collegamento | 1/4" |
Dimensioni e peso | |
Larghezza | 51 mm |
Profondità | 43 mm |
Altezza | 34 mm |
Dati su imballaggio | |
Quantità per pacco | 1 pz |
- Type
- Flow meter
SHIPMENTS
All shipments are processed from our offices in Rome and are handled by leading international couriers based on the final destination, weight and value of the order.
Orders are processed within 2 business days.
The delivery of the products is carried out within 4 working days from the confirmation of the order (you will receive an email containing the tracking code of your order).
The courier delivers from Monday to Friday between 8.30 and 18.00.
It is not possible in any way to fix the time and / or day of delivery of the products, nor is it possible to request delivery to post office boxes.
The contribution for transport costs calculated during the order may vary in cases where the bulk and / or weight of the goods exceeds the minimum weight / overall dimensions.
Should the shipping address differ from the billing address, please specify it in the notes accompanying the order to avoid unnecessary delays.
RIGHT OF WITHDRAWAL
To exercise the right of withdrawal, you must inform us (APPIEFFE GROUP SRL, Via Codigoro 9, 00127 Rome, Tel +39 06 92939466, email: info@trippodo.com) of your decision to withdraw from this contract by means of a declaration explicit (e.g. letter sent by post, fax or e-mail). To this end, you can use the attached withdrawal form, but it is not mandatory. To meet the withdrawal deadline, it is sufficient for you to send the relevant communication
to exercise the right of withdrawal before the expiry of the withdrawal period.
Pursuant to art. 5 of Legislative Decree 206/2005, the Customer who purchases goods for purposes not related to his professional activity and therefore makes the purchase indicating the Fiscal Code and not the VAT number, has the right to withdraw from the remote purchase contract within 14 calendar days starting from receipt of the order (Legislative Decree 21/2014 of 21 February 2014) by preferably sending a communication by registered letter with return receipt at the address:
APPIEFFE GROUP SRL
Via Codigoro 9
00127 Rome
or at the email address info@trippodo.com or by fax at +39 06 99367459.
It is possible to send a PEC (Certified Electronic Mail) instead of the registered letter to the address appieffegroup@pec.it only if this is sent in turn from a certified email address.
It is also possible to request the right of withdrawal via the "GOODS RETURN" link in the customer profile of our site, once logged in with login and password, without necessarily sending registered letters or other communications.
The refund will be made within 14 calendar days from the arrival of the object at our office.
NB: The costs of returning defective or non-compliant goods will be at our expense.
APPIEFFE GROUP SRL is not liable for any damage that the goods may suffer during transport, nor for any theft, loss or tampering that may occur in this phase. It is therefore suggested to make insured shipments.